Home/Toyota/Venza/Toyota Venza I (2008-2012)/Repair manual/Engine Control Systems/Engine Control System (2GR-FE) (Service Specifications): Sp…
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Control System (2GR-FE) (Service Specifications): Specifications Toyota Venza I

TORQUE SPECIFICATIONS

Part TightenedN*mKgf*cmFt.*lbf
Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly101027
Engine wire x Cylinder head cover sub-assembly1413810
Throttle body assembly x Intake air surge tank101027
Vacuum switching valve x Bracket4.04135 in.*lbf
Transverse engine mounting bracket x Front engine mounting insulator assembly8788764
Transverse engine mounting bracket x Engine assembly6465347
Front engine mounting insulator assembly x Sub-frame5253038
ECM bracket x Body8.08271 in.*lbf
ECM bracket x ECM3.03127 in.*lbf
Accelerator pedal sensor assembly x Body5.45548 in.*lbf
VVT sensor x Cylinder head cover sub-assembly101027
Crank position sensor x Cylinder block sub-assembly101027
Spark plug assembly x Cylinder head sub-assembly1818413
Ignition coil assembly x Cylinder head cover101027
Engine coolant temperature sensor x Cylinder head sub-assembly2020415
Knock control sensor x Cylinder block sub-assembly2020415
Air fuel ratio sensor x Exhaust manifoldWithout SST4444933
With SST4040830
No. 2 oxygen sensor x Exhaust pipeWithout SST4444933
With SST4040830
Oxygen sensor x Exhaust pipeWithout SST4444933
With SST4040830