Home/Toyota/Venza/Toyota Venza I (2008-2012)/Repair manual/Engine Control Systems/Engine Control System (1AR-FE) (Service Specifications): Ot…
Contents Wiring diagrams Section: Engine Control Systems All sections

Engine Control System (1AR-FE) (Service Specifications): Other Toyota Venza I

SERVICE DATA

Camshaft timing oil control valve assembly
ResistanceAt 20°C (68°F)6.9 to 7.9 ohms
Throttle body
Resistance2 (M+) - 1 (M-)0.3 to 100 ohms at 20°C (68°F)
Accelerator pedal assembly
Standard voltage (Accel Sensor Out No. 1)Released0.5 to 1.1 V
Depressed2.6 to 4.5 V
Standard voltage (Accel Accel Sensor Out No. 2)Released1.2 to 2.0 V
Depressed3.4 to 4.98 V
Mass air flow meter
Resistance1 (THA) - 2 (E2)13.6 to 18.4 kohms at -20°C (-4°F)
1 (THA) - 2 (E2)2.21 to 2.69 kohms at 20°C (68°F)
1 (THA) - 2 (E2)0.49 to 0.67 kohms at 60°C (140°F)
Spark plug
Standard resistance10 Mohmsor more
Recommended spark plugSK16HR11 DENSO made
Maximum electrode gap1.3 mm (0.0512 in.) for used spark plug
Electrode gap1.0 to 1.1mm (0.0394 to 0.0433 in.) for new spark plug
Crankshaft position sensor
ResistanceCold1630 to 2740 ohms
Hot2065 to 3225 ohms
Engine coolant temperature sensor
Resistance20°C (68°F)2.32 to 2.59 kohms
80°C (176°F)0.310 to 0.326 kohms
Knock sensor
ResistanceAt 20°C (68°F)120 to 280 kohms
Air fuel ratio sensor
Resistance1 (HT) - 2 (+B)1.8 to 3.4 ohms at 20°C (68°F)
1 (HT) - 4 (AF-)10 kohms or higher
Oxygen sensor
Resistance1 (HT) - 2 (+B)11 to 16 ohms at 20°C (68°F)
1 (HT) - 4 (E)10 kohms or higher
IG2 relay
Specified condition3 - 510 kohms or higher
3 - 5Below 1 ohms (when battery voltage is applied to terminals 1 and 2)