Tightening Torque Specifications
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | Kgf-m | Lb-ft | |
| Engine cover bolt | 8 | 0.8 | 5.8 |
| Intake manifold bolt and nut | 25 | 2.5 | 18.0 |
| Intake manifold rear stiffener bolt | 25 | 2.5 | 18.0 |
| Intake manifold front stiffener bolt | 55 | 5.5 | 40.0 |
| Cylinder head cover nut | 11 | 1.1 | 8.0 |
| Cylinder block heater bolt | 11 | 1.1 | 8.0 |
| Engine mounting bolts and nut | 55 | 5.5 | 40.0 |
| Engine front and rear mounting nut | 45 | 4.5 | 32.5 |
| Timing chain cover bolt and nut | 11 | 1.1 | 8.0 |
| Generator belt idler pulley nut | 42 | 4.2 | 30.5 |
| Generator belt tensioner bolt | 25 | 2.5 | 18.5 |
| A/C compressor bracket bolt | 55 | 5.5 | 40.0 |
| Crankshaft pulley bolt | 150 | 15.0 | 108.5 |
| Camshaft timing sprocket bolt | 80 | 8.0 | 57.5 |
| Timing chain tensioner adjuster No.2 bolt | 11 | 1.1 | 8.0 |
| Timing chain tensioner adjuster No.2 nut | 45 | 4.5 | 33.0 |
| Timing chain tensioner nut | 25 | 2.5 | 18.0 |
| Timing chain tensioner adjuster No.1 bolt | 11 | 1.1 | 8.0 |
| Timing chain guide No.1 bolt | 9 | 0.9 | 6.5 |
| Camshaft housing bolt | 11 | 1.1 | 8.0 |
| Cylinder head bolt | 105 | 10.5 | 76.0 |
| Cylinder head bolt (hex hole bolt) | 11 | 1.1 | 8.0 |
| Engine RH mounting bracket bolt | 55 | 5.5 | 40.0 |
| Connecting rod bolt | 15 N.m (1.5 kgf-m, 11.0 lb-ft) 45° and 45° by the specified procedure | ||
| Crankcase bolt with 10 mm thread diameter ((1) - (10)) | 58 | 5.8 | 42.0 |
| Crankcase bolt with 8 mm thread diameter ((11) - (22)) | 25 | 2.5 | 18.0 |
| CKP sensor bolt | 6 | 0.6 | 4.5 |
| Flywheel or drive plate bolt | 70 | 7.0 | 51.0 |
| Engine front mounting bracket bolt | 55 | 5.5 | 40.0 |
TIGHTENING TORQUE SPECIFICATIONS
Reference
For the tightening torque of fasteners not specified in this section, refer to FASTENERS INFORMATION.