Intake (Induction) (H4SO U5): Other Subaru Outback BP

CAUTION

1. Wear working clothing, including a cap, protective goggles, and protective shoes during operation.
2. Remove contamination including dirt and corrosion before removal, installation or disassembly.
3. Keep the disassembled parts in order and protect them from dust or dirt.
4. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.
5. Be careful not to burn your hands, because each part on the vehicle is hot after running.
6. Be sure to tighten fasteners including bolts and nuts to the specified torque.
7. Place shop jacks or safety stands at the specified points.
8. Before disconnecting electrical connectors of sensors or units, be sure to disconnect ground cable from battery.

Scheme 277

Scheme 278

Scheme 279

1. Disconnect ground cable from battery.
2. Disconnect connector from air flow sensor.
3. Remove the clip (A) above the air cleaner case.
4. Raise air cleaner upper cover and remove air cleaner element.

Scheme 280