Contents Wiring diagrams Section: Ignition System All sections

Ignition (H4SO): Removal & Installation Subaru Outback BP

Ignition System 9 illustrations ~120 words

REMOVAL

CAUTIONAll spark plugs installed on an engine, must be of the same heat range.

Spark plug

Scheme 15

Scheme 15

Scheme 16

Scheme 16: RH SIDE

Scheme 17

Scheme 17

Scheme 18

Scheme 18
  1. Disconnect ground cable from battery.
  2. Remove air cleaner case. Refer to «REMOVAL»(ref-208359-S22811893822005120700000) , Air Cleaner Case.
  3. Remove spark plug cords by pulling boot, not cord itself.
  4. Remove spark plugs with the spark plug socket.

Scheme 19

Scheme 19: LH SIDE

Scheme 20

Scheme 20

Scheme 21

Scheme 21

Scheme 22

Scheme 22

Scheme 23

Scheme 23
  1. Disconnect battery ground cable.
  2. Disconnect washer motor connector.
  3. Disconnect rear window glass washer hose from washer motor, then plug connection with a suitable cap.
  4. Remove the two bolts which hold the washer tank, then take the tank away from the working area.
  5. Remove spark plugs cord by pulling boot, not cord itself.
  6. Remove spark plug with the spark plugs socket.