Home ReviewsRefund
Home/Subaru/Impreza/Subaru Impreza GH (2007-2011)/Repair manual/Communication Devices/Lan System (Diagnostics) (Sti): Overview
Contents Wiring diagrams Section: Communication Devices All sections

Lan System (Diagnostics) (Sti): Overview Subaru Impreza GH

Communication Devices ~136 words

OPERATION

For details concerning DTC reading procedure, refer to "Subaru Select Monitor". Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) , OPERATION, Subaru Select Monitor.

For details concerning DTC clear operation, refer to "Subaru Select Monitor". Ref. to CLEAR MEMORY MODE , OPERATION, Subaru Select Monitor.

  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Integ. unit mode}.
  3. On the «Integ. unit mode failure diag» display screen, select the {Current Data Display & Save}.
  4. Using the scroll key, scroll the display screen up or down until the desired data is shown. Ref. to «DISPLAY OF DATA»(ref-357102-S08288461942010030800000) , OPERATION, Subaru Select Monitor.

For detailed procedures of User Customizing, refer to "SUBARU SELECT MONITOR". Ref. to USER CUSTOMIZING , OPERATION, Subaru Select Monitor.

More articles — Lan System (Diagnostics) (Sti)