| 41099AC000 | ENGINE SUPPORT ASSY | Used for supporting engine. |
| 18801AA000 | OIL PRESSURE GAUGE ASSY | Used for measuring the secondary pressure (line pressure). |
| 18658AA020 | WRENCH COMPL RETAINER | Used for removing and installing the differential side retainer. |
| 18681AA000 | PRESSURE GAUGE ADAPTER | Used for measuring oil pressure. NOTE: Used together with the genuine O-ring (part No. 806911080). |
| 18769AA000 | EXPANDER PULLEY | Used for removing and installing the secondary pulley assembly. |
| 498897700 | OIL PRESSURE ADAPTER SET | Used for measuring the secondary pressure (line pressure) and transfer clutch hydraulic pressure. |
| 498575400 | OIL PRESSURE GAUGE ASSY | Used for measuring the transfer clutch hydraulic pressure. |
| 498277200 | STOPPER SET | Used for removing and installing automatic transmission assembly to engine. Used for preventing the torque converter from dropping off. |
| 398527700 | PULLER ASSY | Used for removing the extension case oil seal. Used for removing the roller bearing of the primary pulley and secondary pulley. Used for removing the bearing of reduction driven gear. Used for removing the differential side retainer bearing outer race. |
| 18760AA000 | Claw | Used for removing ball bearing of front reduction driven gear. Used together with PULLER ASSY (398527700). |
| 498057300 | INSTALLER | Used for installing the extension case oil seal. |
| 18632AA000 | TRANSMISSION STAND | Used for disassembling and assembling the transmission. |
| 498255400 | PLATE | Used for measuring the backlash of hypoid gear. |
| 498247001 | MAGNET BASE | Used for measuring the backlash of differential bevel pinion gear. Used for measuring the backlash of hypoid gear. Used together with DIAL GAUGE (498247100). |
| 498247100 | DIAL GAUGE | Used for measuring the backlash of differential bevel pinion gear. Used for measuring the backlash of hypoid gear. Used together with DIAL GAUGE (498247101). |
| 18675AA000 | DIFFERENTIAL SIDE OIL SEAL INSTALLER | Used for installing the differential side retainer oil seal. |
| 18762AA000 | COMPRESSOR SPECIAL TOOL | Used for disassembling and installing the multi-plate clutch piston for shifting. |
| 18765AA000 | COMPRESSOR SUPPORT | Used for disassembling and installing the multiplate clutch for shifting. |
| 18763AA000 | COMPRESSOR SHAFT | Used for disassembling and installing the multiplate clutch for shifting. |
| 28399SA010 | OIL SEAL PROTECTOR | Used for protecting oil seal when installing front drive shaft. |
| 18667AA010 | HOLDER | Used for removing and installing the drive pinion lock nut. Used as a holder to rotate gear when checking tooth contact. |
| 18270KA010 | SOCKET (E16) | Used for removing and installing the center support COMPL. |
| 18270KA020 | SOCKET (E20) | Used for removing and installing the hypoid driven gear. Used for removing and installing the drive pinion shaft retainer. |
| 398497701 | SEAT | Used for removing and installing the ball bearing. |
| 398177700 | INSTALLER | Used for removing and installing the ball bearing and tapered roller bearing. Used for installing the parking gear. |
| 398643600 | GAUGE | Used for measuring the total end play, extension end play and drive pinion height. |
| 899864100 | REMOVER | Used for removing and installing the ball bearing. |
| 498077000 | REMOVER | Used for removing ball bearing of front reduction drive gear. Used for removing the inner bearing inner race of the drive pinion shaft. Used for removing the differential taper roller bearing. |
| 18657AA010 | INSTALLER | Used for installing the oil seal of inhibitor switch. |
| 18657AA020 | OIL SEAL INSTALLER | Used for installing the oil seal. |
| 18621AA000 | ADAPTER WRENCH | Used for removing and installing the drive pinion shaft lock nut. |
| 18651AA000 | INSTALLER | Used for installing the bearing of front reduction drive gear. |
| 18720AA000 | REMOVER | Used for removing ball bearing of reduction driven gear. |
| 498497300 | CRANKSHAFT STOPPER | Used for stopping the drive plate rotation when removing and installing the drive plate. |
| 20299AG010 | PRESS SNAP RING | Used for installing the bearing on primary pulley side. |
| 398791600 | REMOVER | Used for removing and installing the shifter arm spring pin. |
| 399513600 | INSTALLER | Used to install the rear drive shaft ball bearing. Used for removing the bearing of the oil pump chain sprocket. |
| 499267300 | STOPPER PIN | Used for adjusting the inhibitor switch. |
| 499277100 | BUSHING 1-2 INSTALLER | Used for installing the front differential taper roller bearing. Used for removing and installing the transfer reduction drive gear. Used for installing the ball bearing of the transfer reduction drive gear. Used for installing the oil seal. Used for installing the ball bearing of the transfer reduction driven gear. |
| 499277200 | INSTALLER | Used for installing the inner bearing inner race of drive pinion shaft. Used for installing the reduction driven gear. |
| 499575400 | GAUGE | Used for measuring height of end play. |
| 499737100 | PULLER SET | Used for measuring the transfer end play. Use the rack only. |
| 499575600 | GAUGE | Used for measuring height of end play. |
| 499787700 | WRENCH | Used for measuring the differential pinion shaft backlash. |
| 499757002 | INSTALLER | Used for removing the bearing of front reduction driven gear. |
| 18767AA000 | BEARING REMOVER | Used for removing the transfer reduction drive gear. Used for removing the reduction driven gear bearing retainer. |
| 499755602 | PRESS SNAP RING | Used for installing the oil seal. Used for installing the ball bearing and roller bearing. Used for installing the ball bearing of the front reduction driven gear. |
| 498077600 | REMOVER | Used for removing the ball bearing of the rear drive shaft. Used for removing the ball bearing of transfer reduction driven gear. Used for removing ball bearing of reduction driven gear. Used for removing the ball bearing of drive sprocket. |
| 1B022XU0 | SUBARU SELECT MONITOR III KIT | Used for troubleshooting the electrical system. |
