Washer System & Wiper System: Other Subaru Forester SG

CAUTION

1. Reconnect the connectors and hoses securely. After reconnecting, confirm that each function operates normally.
2. Be careful that wire harnesses of airbag system pass near electrical parts and switches.
3. Wire harnesses and connectors of all airbag system are yellow color. Do not use a tester on these circuits.
4. Care must be taken when installing the piping hose so that no bending, jamming, etc. are caused.
5. If even a little oil or grease such as silicon oil gets in the tank and washer passages, an oil film easily forms on the glass, causing the wiper to chatter and judder. Therefore, be careful not to let this happen.

WIPER AND WASHER (FRONT)

Refer to WIPER/WASHER .

WIPER AND WASHER (REAR)

Refer to WIPER/WASHER .

Scheme 41

Scheme 42

Scheme 43

1. Loosen the screw to remove the steering column cover.
2. Disconnect the connectors from combination switches.
3. Loosen the screw to remove combination switch.