| Starter armature assembly | Standard runout | For Manual Transmission | 0.05 mm (0.002 in.) |
| For Automatic Transmission | 0.02 mm (0.0008 in.) |
| Maximum runout | For Manual Transmission | 0.10 mm (0.004 in.) |
| For Automatic Transmission | 0.05 mm (0.002 in.) |
| Standard depth Segment - Mold | For Manual Transmission | 0.50 mm (0.020 in.) |
| For Automatic Transmission | 0.7 mm (0.0276 in.) |
| Minimum depth Segment - Mold | For Automatic Transmission | 0.20 mm (0.0079 in.) |
| Standard resistance | Segment - Segment for Automatic Transmission | Below 1 ohms |
| Commutator - Armature coil core for Automatic Transmission | 10 kohms or higher |
| Standard diameter | For Automatic Transmission | 29 mm (1.1417 in.) |
| Minimum diameter | For Automatic Transmission | 28 mm (1.1024 in.) |
| Brush length | Standard length | For Manual Transmission | 12.3 mm (0.484 in.) |
| For Automatic Transmission | 14.4 mm (0.5669 in.) |
| Minimum length | For Manual Transmission | 7.0 mm (0.276 in.) |
| For Automatic Transmission | 9.0 mm (0.3543 in.) |
| Standard brush spring force | For Manual Transmission | 15.9 to 19.5 N (1.6 to 2.0 kgf, 3.6 to 4.4 lbf) |
| Minimum brush spring force | For Manual Transmission | 2.5 N (0.3 kgf, 0.6 lbf) |
| Standard resistance for Automatic Transmission | A - B A - C B - D C - D | 10 kohms or higher |
| A - D B - C | Below 1 ohms |
| Starter magnetic switch assembly | Standard resistance Terminal 50 - Terminal C | For Manual Transmission | Below 1 ohms |
| For Automatic Transmission | Below 1 ohms |
| Standard resistance Terminal 50 - Switch body | For Manual Transmission | Below 1 ohms |
| For Automatic Transmission | Below 2 ohms |
| Standard resistance Terminal 30 - Terminal C | For Manual Transmission | 1 Mohms or higher |
| Ignition switch assembly | Standard resistance All combinations of all terminals | LOCK | 10 kohms or higher |
| Standard resistance 2 (AM1) - 3 (ACC) | ACC | Below 1 ohms |
| Standard resistance 2 (AM1) - 3 (ACC) - 4 (IG1) 6 (IG2) - 7 (AM2) | ON | Below 1 ohms |
| Standard resistance 1 (ST1) - 2 (AM1) - 4 (IG1) 6 (IG2) - 7 (AM2) - 8 (ST2) | START | Below 1 ohms |
| Engine switch | Standard resistance 5 (SSW1) - 6 (AGND) 1 (SSW2) - 6 (AGND) | Pushed | Below 1 ohms |
| Standard resistance 5 (SSW1) - 6 (AGND) 1 (SSW2) - 6 (AGND) | Not pushed | 10 kohms or higher |
| Starter relay | Specified condition | 1 - 2 (Battery voltage not applied to terminals 1 and 2) (Measured temperature : 20 °C (68 °F)) | 93.8 to 136.4 kohms |
| 3 - 5 (Battery voltage is applied between terminals 1 and 2) | Below 1 ohms |
| 3 - 5 (Battery voltage is not applied between terminals 1 and 2) | 10 kohms or higher |
| Inhibitor relay | Specified condition | 1 - 2 (Battery voltage not applied to terminals 1 and 2) (Measured temperature : 20 °C (68 °F)) | 93.8 to 136.4 kohms |
| 3 - 5 (Battery voltage is applied between terminals 1 and 2) | Below 1 ohms |
| 3 - 5 (Battery voltage is not applied between terminals 1 and 2) | 10 kohms or higher |
| ST cut relay | Specified condition | 1 - 2 (Battery voltage not applied to terminals 1 and 2) (Measured temperature : 20 °C (68 °F)) | 93.8 to 136.4 kohms |
| 3 - 4 (Battery voltage not applied to terminals 1 and 2) | Below 1 ohms |
| 3 - 4 (Battery voltage applied to terminals 1 and 2) | 10 kohms or higher |
| 3 - 5 (Battery voltage not applied to terminals 1 and 2) | 10 kohms or higher |
| 3 - 5 (Battery voltage applied to terminals 1 and 2) | Below 1 ohms |
| IGS cut relay | Specified condition | 1 - 2 (Battery voltage not applied to terminals 1 and 2) (Measured temperature : 20 °C (68 °F)) | 93.8 to 136.4 kohms |
| 3 - 5 (Battery voltage not applied to terminals 1 and 2) | 10 kohms or higher |
| 3 - 5 (Battery voltage applied to terminals 1 and 2) | Below 1 ohms |
