Home ReviewsRefund
Home/Saturn/Aura/Saturn Aura I (2006-2010)/Repair manual/Communication Devices/Programming and Setup - All Systems: Specifications
Contents Wiring diagrams Section: Communication Devices All sections

Programming and Setup - All Systems: Specifications Saturn Aura I

Communication Devices

Torque Sensor Calibration

  1. Install the scan tool.
  2. Turn ON the ignition, with the engine OFF.
  3. Center the steering wheel.
  4. With the scan tool select Special Functions.
  5. Select Torque Sensor Calibration and press the Enter key. The scan tool screen will flash Calibration in Progress, then display Calibration Complete.
  6. Press the exit key
  7. Use the scan tool in order to clear any EPS DTCs
  8. Turn OFF the ignition.

More articles — Programming and Setup - All Systems