Home ReviewsRefund
Home/Saab/9-3/Saab 9-3 I (1998-2003)/Repair manual/Twice - 9-3 (9400)/Tech 2
Contents Wiring diagrams Section: Twice - 9-3 (9400) All sections

Tech 2 Saab 9-3 I

Twice - 9-3 (9400) ~134 words

Tech 2

  1. Look at the 'FASTEN SEATBELT' lamp.
  2. Press once per second on the remote control's unlock button until the 'FASTEN SEATBELT' lamp flashes once. It may be necessary to press more than 8 times.
  3. Remove the key from the ignition and insert the next key.
  4. Turn the key to the 'ON' position.
  5. Repeat following steps 1 and 2. More keys and remote controls can be programmed following steps 3 and 5. Press 'OK' once all keys and remote controls have been programmed.
  1. Once all keys have been programmed, select "Immobilization".
  2. Carry out immobilization programming.
  3. Erase DTCs in TWICE.
  4. Erase DTCs in the engine management system.
  5. Scrap the included transponder.
  6. Fill in the return form that comes with the spare part box and return TWICE within 40 days of the order date.