TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Front Caliper Guide Pins | 18-22 (25-30) |
| Front Caliper Mounting Bolt | 81 (110) |
| Rear Hub Nut | 37 (50) (1) |
| Rear Caliper Mounting Bolt | 59 (80) |
| Wheel Lug Studs |
| 9-3 | 81 (110) |
| 9-5 | 89 (120) |
| (1) Tighten an additional 30-45 degrees. |
| (1) | Tighten an additional 30-45 degrees. |
| Application | In. (mm) |
|---|
| Front Disc |
| Diameter | 11.3 (288) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0006 (.015) |
| Original Thickness | .98 (25) |
| Minimum Refinish Thickness (1) | .91 (23.5) |
| Rear Disc |
| Diameter | 11.2 (286) |
| Lateral Runout | .003 (.08) |
| Parallelism | .0006 (.015) |
| Original Thickness | .39 (10) |
| Minimum Refinish Thickness (1) | .31-.33 (8.0-8.5) |
| Front Brake Pad |
| New Thickness | .55 (14) |
| Service Thickness | .20 (5) |
| Rear Brake Pad |
| New Thickness | .43 (11) |
| Service Thickness | .20 (5) |
| (1) Remove equal thickness from each side when refinishing. |
| (1) | Remove equal thickness from each side when refinishing. |
DISC BRAKE SPECIFICATIONS
