Recommended tools
| reference | designation | reference | reference |
|---|---|---|---|
| [1] | RH engine support | 7002-TA | DESVIL 126 |
| reference | designation | reference | reference |
|---|---|---|---|
| [2] | L.H. engine support | 9015-T | XU/XUD engines (reference 175/3) |
| reference | designation | reference | reference |
|---|---|---|---|
| [3] | engine support cradle | 2509-T | DESVIL 125 |
Preparing the engine
Remove
- The bolts (1)
- The bearing (2)
Fitting the engine to the stand
Fit
- The tool [1] (right hand side)
- The bolts (3)
NoteInsert the washers on the bolts (3) at "a" to allow for the driveshaft bearing alignment dowel
Fit
- The tool [2] (left side)
- The bolts (4)
Position and fix the tools [1] and [2] to the stand [3] using the nuts and bolts (5)