(1) engine speed sensor
Contents
Wiring diagrams Section: Power unit- Tightening torques: DV4C, DV6C, DV6DTED, DV6ETED, DV6UC engines (EURO 5) (DV6C)
- Checking and adjusting values: engines types 4A92 - 4B11 - 4B12 (2.0 i MMC EURO4, 2.0 i MMC EURO2, 1.6 i MMC)
- Tightening torques: 4B11 engine type (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Tightening torques: engine assembly mountings - gearboxes (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Checking and adjusting values: DV6C - DV6CM engines (DV6C)
- Tightening torques: engine assembly mountings - (BVM 6 (4X4), (4X2)) gearbox (1.8 HDI 150)
- Tightening torques: engine/gearbox mountings (1.6 i MMC)
- Checking and adjusting values: 4N13 engine type (1.8 HDI 150)
- Tightening torques: 4N13 engines (EURO 5) (1.8 HDI 150)
- Tightening torques: 4A92 engine type (1.6 i MMC)
- Technical note: engine oil capacities
- Technical note: general engine information
- Technical note: ancillary drive belt
- Tightening torques: engine assembly mountings - gearbox (DV6C)
- Check: end of compression pressure (4B11 - 4B12 engines) (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Check: pressure, engine end of compression (1.6 i MMC)
- Check: pressure, engine end of compression (1.8 HDI 150)
- Checking: pressure, engine end of compression (DV6C)
- Dismantling: engine top 4B11 / 4B12 (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Refitting: engine top 4B11 / 4B12 (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling - re-assembly: engine - Manual gearbox (1.6 i MMC)
- Dismantling - re-assembly: engine/gearbox assembly (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling: under engine (DV6C)
- Dismantling: engine top (DV6C)
- Refitting: under engine (DV6C)
- Dismantling - re-assembly: engine/gearbox assembly (1.8 HDI 150)
- Refitting: engine top (DV6C)
- Dismantling - re-assembly: engine and gearbox assembly (DV6C)
- Dismantling: engine top 4N13 (1.8 HDI 150)
- Refitting: engine top 4N13 (1.8 HDI 150)
- Refitting: under engine 4N13 (1.8 HDI 150)
- Dismantling: under engine 4N13 (1.8 HDI 150)
- Dismantling: under engine (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Refitting: under engine (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling: engine top 4A92 (1.6 i MMC)
- Dismantling: engine bottom 4A92 (1.6 i MMC)
- Refitting: engine bottom 4A92 (1.6 i MMC)
- Refitting: engine top 4A92 (1.6 i MMC)
- Overhaul: DV4C/M, DV6C/D/E/U, DV6CM/DM/EM/UM engines (DV6C)
- Overhaul: 4B11 - 4B12 engine type (Summary) (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Prohibited operations: direct injection system (HDI) (DV6C)
- Prohibited operations: hdi direct injection system DENSO (1.8 HDI 150)
- Prohibited operations: hdi direct injection system BOSCH
- Prohibited operations: hdi direct injection system DENSO
- Prohibited operations: petrol direct injection system THP
- Prohibited operations: hdi direct injection system CONTINENTAL-SIEMENS
- Fitting: engine on stand (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Fitting: engine on stand (DV6C)
- Fitting: engine on stand 4N13 (1.8 HDI 150)
- Fitting: engine on stand 4A92 (1.6 i MMC)
- Dismantling - re-assembly: Variable timing solenoid valve (1.6 i MMC)
- Dismantling - re-assembly: variable timing electrovalve (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling - re-assembly: coolant temperature sensor (1.6 i MMC)
- Dismantling - re-assembly: coolant temperature sensor (1.8 HDI 150)
- Dismantling - re-assembly: coolant temperature sensor (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling - re-assembly: coolant temperature sensor (DV6C)
- Presentation: 4N13 engine (hdi direct injection system DENSO)
- Presentation: 4A92 engine (indirect injection system)
- Presentation: injection system
- Presentation: DV6CTED engine (hdi direct injection system CONTINENTAL SID 807)
- Operating methods: injection system (engine 4B11)
- Operating methods: petrol injection system (4A92 engine) (1.6 i MMC)
- Operating methods: Stop and Start system (4N13 engine) (1.8 HDI 150)
- Operating methods: Stop and Start system (4A92 engine) (1.6 i MMC)
- Operating methods: injection system 4N13 DENSO (1.8 HDI 150)
- Operating methods: DV6C engine (Stop and start) (DV6C)
- Operating methods: CONTINENTAL SID807 EVO injection (engine DV6CTED) (DV6C)
- Operating methods: injection system (4B11 engine) (2.0 i MMC EURO4)
- Tightening torques: components of the fuel circuit (1.6 i MMC)
- Tightening torques: components of the fuel circuit (1.8 HDI 150)
- Location: components of the exhaust and particle filter circuit
- Location: components of the battery charging circuit
- Location: identification of air conditioning circuit components
- Location: components of the engine cooling system
- Location: components of the lubrication circuit
- Location: components of the pre-postheating system
- Location: components of the air inlet circuit
- Location: components of the exhaust circuit
- Location: components of the battery charging circuit — variant 2
- Location: identification of air conditioning circuit components — variant 2
- Location: components of the air circuit
- Location: engine speed sensor
- Location: components of the exhaust gas recycling system
- Location: components of the vacuum circuit
- Location: engine cooling system
- Location: identification of air conditioning circuit components — variant 3
- Location: components of the air inlet circuit — variant 2
- Location: components of the exhaust circuit — variant 2
- Location: engine speed sensor — variant 2
- Location: engine cooling system — variant 2
- Location: components of the fuel circuit
- Location: components of the battery charging circuit — variant 3
- Location: components of the lubrication circuit — variant 2
- Location: fuel system
- Tightening torques: components of the fuel circuit (DV6C)
- Location: components of the pre-post heating system
- Location: components of the air circuit — variant 2
- Location: components of the exhaust and particle filter circuit — variant 2
- Location: components of the battery charging circuit — variant 4
- Location: identification of air conditioning circuit components — variant 4
- Location: components of the fuel additive system
- Check: low pressure fuel supply circuit (SIEMENS injection) (DV6C)
- Check: low pressure fuel supply circuit (1.6 i MMC)
- Check: low pressure fuel supply circuit (1.8 HDI 150)
- Check: low pressure fuel supply circuit (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Checking: fuel high pressure supply circuit (DENSO 4N13 assembly) (1.8 HDI 150)
- Check: high pressure fuel circuit (DV6C)
- Removing - refitting: engine speed sensor (DV6C)
- Removing - refitting: Pressure sensor / inlet air temperature (DV6C)
- Removing - refitting: fuel temperature sensor (DV6C)
- Removal - refitting: high pressure fuel injection common rail (DV6C)
- Removing - refitting: diesel injector (CONTINENTAL-SIEMENS) (DV6C)
- Removing - refitting: high pressure fuel pump (Continental - SIEMENS) (DV6C)
- Removal - refitting: high pressure fuel regulator on high pressure fuel pump (DV6C)
- Dismantling - re-assembly: Inlet air temperature sensor (1.8 HDI 150)
- Dismantling - re-assembly: Intake manifold pressure sensor (1.8 HDI 150)
- Dismantling - re-assembly: cylinder reference sensors (1.6 i MMC)
- Dismantling - re-assembly: knock detector (1.6 i MMC)
- Dismantling - re-assembly: water-in-fuel sensor (1.8 HDI 150)
- Dismantling - re-assembly: flow regulator of the fuel high pressure pump (1.8 HDI 150)
- Dismantling - re-assembly: fuel temperature sensor (1.8 HDI 150)
- Dismantling - re-assembly: fuel high pressure sensor (1.8 HDI 150)
- Dismantling - re-assembly: engine speed sensor (1.6 i MMC)
- Dismantling - re-assembly: camshaft position sensor (1.8 HDI 150)
- Dismantling - re-assembly: engine speed sensor (1.8 HDI 150)
- Dismantling - re-assembly: petrol injector (1.6 i MMC)
- Dismantling - re-assembly: inlet air pressure and temperature sensor (1.6 i MMC)
- Dismantling - re-assembly: (DENSO) high pressure fuel pump (1.8 HDI 150)
- Dismantling - re-assembly: fuel high pressure common injection rail (1.8 HDI 150)
- Removing - refitting: diesel injectors (Denso) (1.8 HDI 150)
- Dismantling - re-assembly: Engine management ECU (1.8 HDI 150)
- Dismantling - re-assembly: engine ECU (1.6 i MMC)
- Dismantling - re-assembly: engine ECU (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling - re-assembly: engine speed sensor (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling - re-assembly: knock detector (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling - re-assembly: inlet air pressure sensor (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling - re-assembly: inlet air temperature sensor (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Dismantling - re-assembly: cylinder reference sensors (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling - re-assembly: petrol injector (2.0 i MMC EURO4, 2.0 i MMC EURO2)
- Dismantling - re-assembly: camshaft position sensor (DV6C)
- Dismantling - re-assembly: engine ECU (DV6C)
- Dismantling - re-assembly: high pressure fuel sensor (DV6C)
- Drain - refill: fuel tank
- Cleaning: unions on the fuel high pressure common injection rail (HDI) (assembly Siemens) (DV6C)
- Cleaning: unions on the fuel high pressure common injection rail (HDI) (DV6C)
- Cleaning: unions on the fuel high pressure common injection rail HDI (1.8 HDI 150)
- Modification: turbocharger lubrication pipe banjo bolt (DV6C)
- Dismantling - re-assembly: Spark plugs (1.6 i MMC)
- Dismantling - re-assembly: Spark plugs (2.0 i MMC EURO2, 2.0 i MMC EURO4)
- Technical note: additives for particle filter
- Description - operation: fuel pump gauge module
- Description - function: engine oil pressure switch
- Description - function: petrol injector supply rail
- Description - function: canister
- Description - function: catalytic converter
- Description - function: motorised throttle housing
- Description - function: spark plug
- Description - function: engine speed sensor
- Description - operation: engine coolant temperature sensor
- Description - function: inlet air pressure sensor
- Description - function: engine oil pressure switch — variant 2
- Description - function: variable geometry turbocharger
- Description - operation: particle filter differential pressure sensor
- Description - function: fuel flow regulation valve
- Description - function: Intake air temperature sensor
- Description - function: camshaft dephasing control solenoid valve
- Description - function: engine ECU
- Operation: piloted alternator management
- Function: ignition
- Function: air-petrol inlet
- Function: Petrol fumes recirculation
- Description - function: ignition coil
- Description - function: knock sensor
- Description - function: cylinder reference sensor
- Description - function: ON/OFF oxygen sensor
- Description - function: piloted alternator
- Description - operation: valve lift control electrovalve
- Description - function: high pressure fuel pump
- Description - function: fuel filter
- Description - function: pre-heater plug
- Description - function: pre-post heat box
- Operation: exhaust gas recycling (EGR)
- Description - function: diesel fuel temperature sensor
- Description - function: exhaust gas temperature sensor
- Description - operation: exhaust gas recycling exchanger by-pass all-or-nothing solenoid valve
- Description - operation: oil pump
- Description - operation: fuel high pressure common injection rail
- Description - function: catalytic converter — variant 2
- Description - operation: inlet air mixer unit with position repeat sensor
- Function: cooling function incorporated in the engine management ECU (FRIC)
- Description - operation: diesel fuel high pressure sensor
- Description - function: proportional electrovalve
- Function: pre-heating and postheating
- Description - function: engine ECU (4N13 engine)
- Description - function: inlet air temperature and pressure sensor
- Flow chart: injection system (engine 4A92)
- Operation: cooling requirement for the air conditioning (BRAC)
- Function: fuel supply
- Function: cooling requirement for the air conditioning (BRAC)
- Description - function: purge canister solenoid valve
- Operating methods: engine immobiliser
- Function: fuel supply — variant 2
- Description - operation: diesel injector
- Description - function: spark plug — variant 2
- Description - function: petrol injector supply rail — variant 2
- Description - function: Intake manifold pressure sensor
- Description - function: ON/OFF oxygen sensor — variant 2
- Description - function: ignition coil — variant 2
- Function: cooling function incorporated in the engine management ECU (FRIC) — variant 2
- Description - operation: air flow meter
- Description - function: cylinder reference sensor — variant 2
- Flow chart: injection system (4b11 engine)
- Description - function: engine ECU — variant 2
- Function: air-petrol inlet — variant 2
- Description - function: camshaft dephasing control solenoid valve — variant 2
- Description - function: purge canister solenoid valve — variant 2
- Description - operation: air flow meter — variant 2
- Function: fuel additive function
- Table: fault codes - 4A92 (MITSUBISHI ELECTRIC 4A92) engine (1.6 i MMC)
- Table: fault codes - 4N13 (DENSO HDI 4N13) engine (1.8 HDI 150)
- Table: fault codes - stop and start ECU
- Table: fault codes - engine DV6C (CONTINENTAL SID807) branch 2 (DV6C)
- Help in diagnosis: diagnostic warning lamp lights - 4A92 engine (1.6 i MMC)
- Help in diagnosis: diagnostic warning lamp lights - 4N13 (DENSO HDI) engine (1.8 HDI 150)
- Help in diagnosis: the engine has stalled - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Help in diagnosis: diagnostic warning lamp lights - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Help in diagnosis: starting problem - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Help in diagnosis: engine hesitation - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Help in diagnosis: malfunctioning of the engine when idling - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Help in diagnosis: lack of power - engine DV6C (CONTINENTAL SID 807) branch 2 (DV6C)
- Battery
- Body
- Bodywork
- Braking
- Comfort and convenience
- Confort
- Connector pinouts
- Current generation
- Dashboard
- Driving assistance
- Electrical harnesses
- Engine
- Front anti -roll bar
- Front axle
- Front seats
- Front section
- Front shock absorbers
- Gearbox assembly
- General points
- General points about the vehicle
- Instrument panel
- Instruments and controls
- Lighting - signalling
- Mechanical
- Other
- Power unit
- Pre-heating
- Protections and doors
- Rear axle
- Rear door windows
- Rear seats
- Rear section
- Rear shock absorbers
- Roof bow
- Roof panel
- Side structure
- Starting
- Steering
- Suspension
- Transmission
- Washing and wiping