Bracket - Alternator, Remove and Install
Disconnect ground cable from battery.
Remove alternator - see corresponding operation.
Unbolt servo pump from alternator bracket.
For this, unscrew rear fastening bolts (1) and front fastening bolt (2).
Important:
| System remains closed. | |||
|---|---|---|---|
| .P. D2770.tif | 9 | 7,5 | tiff;; |
Unscrew fastening bolts (4) from alternator bracket.
| Remove alternator bracket. | |||
|---|---|---|---|
| .P. D7368.tif | 9 | 7,5 | tiff;; |
Install alternator bracket - torque 40 Nm/29.5 lbf. ft.
Fasten servo pump to alternator bracket.
Servo pump (1) to alternator bracket - 30 Nm/22 lbf. ft.
| Servo pump clip (2) to servo pump - 20 Nm/15 lbf. ft | |||
|---|---|---|---|
| .P. D2770.tif | 9 | 7,5 | tiff;; |
Install alternator - see corresponding operation.
Alternator to alternator bracket - 20 Nm/15 lbf. ft.
Release tension of ribbed V-belt via dynamic tensioner and install.
Apply hexagon wrench with suitable extension to fastening bolt of crankshaft pulley and apply pressure in direction shown.
| Connect ground cable to battery. | |||
|---|---|---|---|
| .P. D2769.tif | 9 | 7,5 | tiff;; |