Alternator, Remove and Install
Disconnect ground cable from battery. Remove air intake hose from air flow meter.
| Remove lower engine compartment cover. | |||
|---|---|---|---|
| .P. D2752.tif | 9 | 7,5 | tiff;; |
| Release ribbed V - belt at tension roller and remove from alternator crankshaft pulley. | |||
| .P. D2769.tif | 9 | 7,5 | tiff;; |
Loosen cable connections from alternator.
| Unscrew upper bolt from alternator. | |||
|---|---|---|---|
| .P. D2754.tif | 9 | 7,5 | tiff;; |
Unscrew lower bolt from alternator and remove alternator.
Install
Insert alternator and fasten.
Tightening torque - 28 Nm/21 lbf. ft.
| .P. D2755.tif | 9 | 7,5 | tiff;; |
Connect cable to alternator.
Release tension roller and place ribbed V -belt on alternator crankshaft pulley.
Adjustment of the ribbed V -belt is not required.
Install lower engine compartment cover.
Install air intake hose and connect battery.
Important:
| Check all cable connections for good condition and firm seat. | |||
|---|---|---|---|
| .P. D2755.tif | 9 | 7,5 | tiff;; |