Table 7, F7:PROGRAMMING
ENGINE TYPE
| Conditions for checking | Nominal Value |
Affected terminal: -
Possible trouble codes: -
With this TECH 1 function the engine type that is installed can be selected from the list presented on the TECH 1.
Petrol engines only:
Ignition "OFF"
Press key F7 in the system main menu, select ENGINE TYPE using the arrow keys and confirm with YES.Follow the instructions on the TECH 1 display.
Ignition "ON
Wait 5 s.Ignition "OFF"
Wait 10 s.Ignition "ON
If TECH 1 shows the display on the right after programming is completed, the engine type has been successfully programmed:
| ENGINE TYPE |
PROGRAMMING
COMPLETED!
If TECH 1 shows the display on the right, an engine type was selected which does not match the installed engine.
| WRONG |
ENGINE TYPE
SELECTED!
| If TECH 1 shows the display on the right, a fault has occurred during programming. | ENGINE TYPE |
PROGRAMMING
| FAILED! |