Immobiliser System Modification F7:PROGRAMMING
ENGINE TYPE
| Conditions for checking | Nominal Value |
Affected terminals: -
Possible trouble codes: -
With this diagnostic tester function the engine type that is installed can be selected from the list presented on diagnostic tester.
Vehicle with petrol engine
Ignition OFF
Press corresponding key in the system main menu to call up desired test functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display.
If the display on the right appears on diagnostic tester, an engine type was selected which does not match the installed engine.
| If the display on the right appears on diagnostic tester, a fault has occurred during programming. |
ENGINE TYPE
PROGRAMMING
COMPLETED!
WRONG
ENGINE TYPE
SELECTED!
ENGINE TYPE
PROGRAMMING
| FAILED! |