Control Unit - Telephone System - Replace (Upgrade Kit) Opel Corsa D

Remove

1. 1. Disconnect battery

2. 2. Remove lower foot well panelling, passenger side (3). • Undo clip (1) • Unscrew bolt (2) • Remove from the guide

3. 3. Remove glove compartment • Unscrew 4 screws (1) and (2) • Disconnect the wiring harness plug, glove compartment lighting

4. 4. Remove control unit • Cut 2x cable tie (4) • Separate wiring harness plug for power supply (1) • Disconnect wiring harness plug for speaker (2) • Separate wiring harness plug for microphone (3) • Separate base bracket compact plug (5) • Disconnect antenna cable (6)

Install

5. 5. Fit control unit • Connect 4x wiring harness plug • Connect aerial cable • Install control unit – Connect 2x cable tie
6. 6. Attach glove compartment • Fix wiring harness plug • Tighten 4x bolts
7. 7. Attach lower right footwell panelling • Clip panelling in position • Tighten bolt
8. 8. Connect battery
9. 9. Program volatile memories