Remove
- 1. Remove lower foot well panelling, passenger side (3). • Undo clip (1) • Unscrew bolt (2) • Remove from the guide
- 2. Remove glove compartment • Unscrew 4 screws (1) and (2) • Disconnect the wiring harness plug, glove compartment lighting
- 3. Remove base holder • Unscrew bolt (1) • Lay base bracket aside
- 4. Separate base bracket at control unit • Separate compact plug (1) • Disconnect antenna cable (2)
Install
- 5. Connect base bracket at control unit • Connect aerial cable • Connect compact plug
- 6. Fit glove compartment • Connecting the wiring harness plug, glove compartment lighting • Tighten 4x bolts
- 7. Install lower foot well panelling, passenger side. • Insert into guide • Tighten bolt • Clip in clip