| B-06, F7: PROGRAMMING | ||
|---|---|---|
| Test | Work Order Description | Nominal Value |
| T02 | Tester Display ERASE TP-KEY | |
| By means of this diagnostic tester function all transponder codes programmed into the immobiliser control unit are deleted. Neither of the two transponder car keys which belong to the vehicle and are supplied to the customer by the manufacturer will function after this. Ignition OFF Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display. | ||
| If the following displays appears during the test, erasing of the transponder codes has been completed successfully: | ERASE TRANSPONDER KEY COMPLETED! | |
| Note: Before the first programming is called up after communication has been established, you must enter the security code. The security code protects the control unit from unauthorised access. The valid code number is printed in the car pass. | ||
| Concerned Terminals: - | ||
| Yes: T03 | No: C-04 |
Home/Opel/Corsa/Opel Corsa B (1993-2000)/Repair manual/Immobiliser/F7:PROGRAMMING Test Step T02 Erase Tp-Key
Contents
Wiring diagrams Section: Immobiliser- Introduction
- The Opel/vauxhall Checking System
- General Instructions/safety Measures
- Checking Equipment
- Abbreviations, Definitions
- Features Specific to This System
- Modification to Control Unit Housing Immobiliser with 90 Degree Ignition Lock.
- Block Diagram - Petrol Engines and 25DT Diesel Engine
- Block Diagram - Diesel Engines (Except 25DT)
- Checking with Tech 1
- General Information on Checking
- How to Connect to Vehicle the Tech 1
- F0:Data List - Petrol Engines and 25 Dt Diesel Engine
- F0:Data List - Test Step 01 Ignition Status
- F0:Data List - Test Step 02 Diesel Cutoff S.
- F0:Data List - Test Step 03 Eng. Check Light
- F0:Data List - Test Step 04 Engine Request
- F0:Data List - Test Step 05 Vehicle Speed
- F0:Data List - Test Step 06 Veh.speed Output
- F0:Data List - Test Step 07 Transponder Key
- F0:Data List - Test Step 08 Transp. Key St.
- F0:Data List - Test Step 09 Transp.key 1 St.
- F0:Data List - Test Step 10 Transp.key 2 St.
- F0:Data List - Test Step 11 Transp.key 3 St.
- F0:Data List - Test Step 12 Transp.key 4 St.
- F0:Data List - Test Step 13 Transp.key 5 St.
- F0:Data List - Test Step 14 Immobiliser Sig.
- F0:Data List - Test Step 15 Security Wait T.
- F0:Data List - Test Step 16 Immo.check Light
- F0:Data List - Test Step 17 Immo. Relay
- Explanation of Tables
- How to Check the Table 1, Diagnostic Plugs X13, Xd and Voltage Supply K117
- Table 2, Trouble Code Table
- Table 2, Trouble Code Table, TC 11 Transponder Key Problem
- Table 2, Trouble Code Table, TC 12 Wrong Transponder Key
- Table 2, Trouble Code Table, TC 13 Immobiliser Not Programmed
- Table 2, Trouble Code Table, TC 14 No Transp. Key Programmed
- Table 2, Trouble Code Table, TC 15 Vehicle Speed Signal Voltage Low
- Table 2, Trouble Code Table, TC 16 Vehicle Speed Signal Voltage High
- Table 2, Trouble Code Table, TC 17 No Engine Request Received
- Table 2, Trouble Code Table, TC 18 Engine Check Light Circuit
- Table 2, Trouble Code Table, TC 19 Immo.check Light Voltage Low
- Table 2, Trouble Code Table, TC 20 Immo.check Light Voltage High
- Table 2, Trouble Code Table, TC 21 Immo. Relay Voltage Low
- Table 2, Trouble Code Table, TC 22 Immo. Relay Voltage High
- Table 2, Trouble Code Table, TC 55 Replace ECU
- Table 3, Part and Catalogue Numbers
- Table 5, F5:Actuator Test Immo. Check L. (Immo. Control Unit)
- Table 5, F5:Actuator Test Immo. Relay (Immo. Control Unit)
- Table 5, F5:Actuator Test Immo.signal Test (Engine Control Unit)
- Table 6, F6:MISC. Tests
- Immobiliser Control Unit
- Table 7, F7:PROGRAMMING Survey of Programming for Immobiliser
- Table 7, F7:PROGRAMMING Note
- How to Program the Table 7, F7:PROGRAMMING Transponder Key
- General Instructions / Safety Measures
- Table 7, F7:PROGRAMMING Transponder Key, Erase
- How to Program the Table 7, F7:PROGRAMMING Immobiliser Control Unit
- Block Diagram
- How to Program the Table 7, F7:PROGRAMMING Engine Type
- Components
- How to Program the Table 7, F7:PROGRAMMING Mechanical Key Number
- Control Unit, Part and Catalogue Numbers
- How to Program the Table 7, F7:PROGRAMMING Vehicle Ident. No.
- Abbreviations / Definitions
- How to Program the Table 7, F7:PROGRAMMING Fuel Cutoff Solenoid Valve
- How to Program the Table 7, F7:PROGRAMMING Engine Control Unit
- Diagnosis Main Check
- Table, Engine Control Units with Immobiliser Function (Petrol Engines)
- How to Connect the Diagnostic Tester
- F2:Trouble Code Trouble Code 11 Transponder Key Problem
- Trouble Code Table, Engine Control Units
- F2:Trouble Code Trouble Code 12 Wrong Transponder Key
- Table, Fuel Cutoff Solenoid Valves for Immobiliser in Diesel Vehicles
- F2:Trouble Code Trouble Code 13 Immobiliser Not Programmed
- Terminal Assignment,wiring Harness Plug, Immo. Control Unit K117, 9-pin
- F2:Trouble Code Trouble Code 14 No Transp. Key Programmed
- Terminal Assignment, Diagnostic Plug Xd, 16-pin
- F2:Trouble Code Trouble Code 15 Vehicle Speed Signal Voltage Low
- Terminal Assignment, Diagnostic Plug X13, 10-pin
- F2:Trouble Code Trouble Code 16 Vehicle Speed Signal Voltage High
- Terminal Assignment, Multec-M Control Unit and Multec Control Units
- F2:Trouble Code Trouble Code 17 No Engine Request Received
- Terminal Assignment, Multec Control Units (C12NZ, C14NZ) (Excerpt)
- F2:Trouble Code Trouble Code 18 Engine Check Light Circuit
- Terminal Assignment, Multec-S Control Unit (X14XE, X16XE, X16XEL) (Excerpt)
- F2:Trouble Code Trouble Code 19 Anti Theft Sig. Signal Voltage Low
- F2:Trouble Code Trouble Code 20 Anti Theft Sig. Signal Voltage High
- F2:Trouble Code Trouble Code 21 Immo. Relay Voltage Low
- Terminal Assignment, Wiring Harness Plug, Dde 2.1 Control Unit (25DT)
- F2:Trouble Code Trouble Code 22 Immo. Relay Voltage High
- Circuit Diagram (Excerpt from Overall Circuit Diagram)
- F2:Trouble Code Trouble Code 55 Replace ECU
- Time Allowance
- F0:Data List Test Step T01 Ignition Status
- F0:Data List Test Step T02 Engine Request
- F0:Data List Test Step T03 Transponder Key
- F0:Data List Test Step T04 Transp. Key St.
- F0:Data List Test Step T05 Transp.key 1 St.
- F0:Data List Test Step T06 Transp.key 2 St.
- F0:Data List Test Step T07 Transp.key 3 St.
- F0:Data List Test Step T08 Transp.key 4 St.
- F0:Data List Test Step T09 Transp.key 5 St.
- F0:Data List Test Step T10 Immobiliser Sig.
- F0:Data List Test Step T11 Diesel Cutoff S.
- F0:Data List Test Step T12 ENG. Check Light
- F0:Data List Test Step T13 VEH.speed Output
- F0:Data List Test Step T14 Vehicle Speed
- F0:Data List Test Step T15 Security Wait T.
- F0:Data List Test Step T16 IMMO. Relay
- F0:Data List Test Step T17 ANTI Theft Sig.
- F5:Actuator Test Test Step T01 IMMO. Relay
- F5:Actuator Test Test Step T02 Diesel Cut. S.
- F6:ADD.FUNCTIONS Test Step T01 MECH. Key-No.
- F6:ADD.FUNCTIONS Test Step T02 READ VIN
- F7:PROGRAMMING Test Step T01 Program Tp-Key
- F7:PROGRAMMING Test Step T02 Erase Tp-Key
- F7:PROGRAMMING Test Step T03 Immobilisation
- F7:PROGRAMMING Test Step T04 Engine Type
- F7:PROGRAMMING Test Step T05 MECH. Key-No.
- F7:PROGRAMMING Test Step T06 VEH. Ident. No.
- F7:PROGRAMMING Test Step T07 ANTI Theft W.
- Electronic Fuel Cutoff Valve X15DT (T4EC1), X17DT (TC4EE1) Engines
- F7:PROGRAMMING Test Step T08 Diesel Cut. S.
- C-011, No Communication Between Diagnostic Tester and Control Unit
- C-02, Control Unit Hardware and Software
- C-03, System Voltage Circuit
- C-04, Transponder Key Circuit
- C-05, Engine Request /Engine Telltale Circuit
- C-06, Immobiliser Signal Circuit/ Vehicle Speed Output Circuit
- C-07, Vehicle Speed Input Circuit
- C-08, Diesel Cutoff Valve Circuit
- C-09, Immobiliser Relay Circuit
- C-10, Anti-Theft Warning System Circuit
- Terminal Assignment, Diagnostic Plug
- Terminal Assignment,engine Control Units
- Immobiliser with Transponder Vehicles with Diesel Engines
- Programming Immobiliser
- Part Locations in Vehicle
- Circuit Diagram for Engines with Engine Management System
- Circuit Diagram for Engines Without Engine Management System
- Table, Engine Control Units with Immobiliser Function
- Form Sheet for Immobiliser
- Immobiliser with Transponder
- Illustration - Location in Vehicle
- Function
- Function - Car Pass
- Transponder Key
- Control Unit
- Security Code
- How to Program the Security Code
- Security Code, Enter
- Loss of Transponder Key
- Transponder Code, Erase
- How to Program the Transponder Code
- How to Replace the Immobiliser Control Unit
- New Immobiliser Control Unit, Activate
- Circuit Diagram
- Terminal Assignment, Wiring Harness Plug for Immobiliser Control Unit, 9-pin
- Trouble Code Table; Immobiliser Control Unit
- Immobiliser Function for All Electronic Engine Systems
- Immobiliser - Introduction
- Immobiliser - Diagnosis
- Immobiliser - Read Trouble Code
- Immobiliser - Check Data List Parameters
- Immobiliser - Carry Out Actuator Tests
- Immobiliser - Carry Out Control Tests
- Immobiliser - Snapshot Mode
- Immobiliser - Final System Test
- Immobiliser - General Safety Measures and Repair Instructions
- Survey of Vehicle
- F2:Trouble Code Table - Trouble Code 11 Transponder Key Problem
- F2:Trouble Code Table - Trouble Code 12 Wrong Transponder Key
- F2:Trouble Code Table - Trouble Code 13 Immobiliser Not Programmed
- F2:Trouble Code Table - Trouble Code 14 No Transp. Key Programmed
- F2:Trouble Code Table - Trouble Code 15 Vehicle Speed Signal Voltage Low
- F2:Trouble Code Table - Trouble Code 16 Vehicle Speed Signal Voltage High
- F2:Trouble Code Table - Trouble Code 17 No Engine Request Received
- F2:Trouble Code Table - Trouble Code 18 Engine Check Light Circuit
- F2:Trouble Code Table - Trouble Code 19 Immo. Check Light Voltage Low
- F2:Trouble Code Table - Trouble Code 20 Immo. Check Light Voltage High
- F2:Trouble Code Table - Trouble Code 21 Immo. Relay Voltage Low
- F2:Trouble Code Table - Trouble Code 22 Immo. Relay Voltage High
- F2:Trouble Code Table - Trouble Code 55 Replace ECU
- F0:Data List - Test Step 06 Veh. Speed Output
- F0:Data List - Test Step 09 Transp. Key 1 St.
- F0:Data List - Test Step 10 Transp. Key 2 St.
- F0:Data List - Test Step 11 Transp. Key 3 St.
- F0:Data List - Test Step 12 Transp. Key 4 St.
- F0:Data List - Test Step 13 Transp. Key 5 St.
- F0:Data List - Test Step 16 Immo. Check Light
- F5:actuator Test Immo. Check Light
- F0:actuator Test Immo. Relay
- F6:miscellaneous Tests Mechanical Key-No.
- F6:miscellaneous Tests Vehicle Ident. No.
- F7:programming Note
- F7:programming Program Tp-Key
- F7:programming Erase Tp-Key
- F7:programming Immobiliser
- F7:programming Engine Type
- F7:programming Mechanical Key-No.
- F7:programming Vehicle Ident. No.
- F7:programming Diesel Cut. S.
- ABS
- ABS 4/4-F
- ABS 5.3
- Additional Lighting
- Adhesive Foiles
- Air Conditioning
- Airbag
- Antenna
- Anti-Theft Warning System-M
- Anti-Theft Warning System-S
- Automatic Transmission Front Wheel Drive
- Battery
- Body Equipment
- Brake Hydraulics, Brake Lines
- Brakes
- Central Door Locking System
- Clutch
- Clutch and Transmission
- Communication / Navigation
- Connector pinouts
- Cooling System
- Corrosion Protection
- Diesel Engine
- DOHC Petrol Engine
- Electrical Equipment and Instruments
- Electrical Window Winders
- Engine and Engine Aggregates
- Engine Electrics
- Eps Electrical Power Steering
- Exhaust System
- Fittings, Hinges, Locks
- Folding Roof
- Frame
- Front Wheel Brake
- Front Wheel Suspension
- Front Wheel Suspension, Wheels and Tyres
- Fuel and Exhaust System
- Fuel Injection Systems
- Fuel System
- Fuse Box
- General Vehicle Information
- Glass, Window Guides, Window Winders
- Headlamps, Lamps and Horn
- Heating, Ventilation
- Heating, Ventilation, Air Conditioning (HVAC)
- Immobiliser
- Info Display Ccrt 700
- Instruments, Telltales
- Maintenance, Body and Chassis Sheet Metal Parts, Frame
- Manual Transmission Front Wheel Drive
- OHC Petrol Engine
- Other Accessories
- Outside Rear View Mirror
- Paint
- Painting Repair Operations
- Painting Repair System
- Power Steering
- Radiator Grille
- Radio
- Radio Interference Suppression
- Rear Axle and Rear Wheel Suspension
- Rear Axle Front Wheel Drive
- Rear End
- Rear Wheel Brake
- Roof
- Roof Box
- Roof Luggage Carrier (Railing)
- Seat Heating Systems
- Seats, Upholstery, Inner Trim Panels
- Secondary Air Injection
- Service Brake, Parking Brake
- Sheet Metal Parts (Bolted)
- Sheet Metal Parts (Cement and Seal)
- Sheet Metal Parts (Welded)
- Sliding Roof
- Special Installations
- Steering
- Steering Gear
- Steering Linkage
- Steering Wheel - Steering Column
- Switches, Control Unit, Relays, Ignition Lock
- TID (Triple Info Display)
- Trailer Hitch
- Trim Panels, Radiator Grille, Spoiler
- Trim Strips, Lettering, Coverings
- Turbo-Charging
- Vehicle Side
- Wheels and Tyres
- Windscreen Wash/wipe System, Heated Screen
- Wiring Harnesses