B-06, f7: Programming
| B-06, F7: PROGRAMMING | ||
|---|---|---|
| Test | Work Order Description | Nominal Value |
| T01 | Tester Display PROGRAM TP-KEY | |
| The transponder car keys can be programmed consecutively and individually. For this, the immobiliser control unit reads out the car key's transponder code and stores it. Important: If a transponder car key is lost, the transponder codes in all remaining car keys must be erased and reprogrammed together with the new transponder car key, for safety reasons. Ignition OFF Press corresponding key in the system main menu to call up Programming functions, select the desired test and confirm with YES. Follow the instructions in the diagnostic tester display. Insert the first non-programmed transponder car key in the ignition lock Ignition ON Ignition OFF | ||
| If the following displays appears during the test, programming has been completed successfully: | TRANSPONDER KEY PROGRAMMING COMPLETED! | |
| Note: If the following display appears during the test, the immobiliser control unit must be programmed before programming of the transponder car keys can proceed. | PROGRAM IMMO. BEFORE NEXT KEY PROGRAMMING! | |
| Note: Before the first programming is called up after communication has been established, you must enter the security code. The security code protects the control unit from unauthorised access. The valid code number is printed in the car pass. | ||
| Concerned Terminals: - | ||
| Yes: T02 | No: C-04 |