Turbocharger Replace Opel Antara I



Turbocharger Replace

Remove

Warning: Make sure that the components are cool.

1. Disconnect the negative battery cable.
2. Remove beauty cover. Refer to Beauty Cover Replace .
3. Remove the charge air system hoses and ducts. Refer to Charging Air System Replace .

4. Remove the PCV valve and adapter. Refer to PCV Valve and Adapter Replace .
5. Remove the pre-catalyst converter. Refer to Catalytic Converter Replace .

6. Disconnect the turbocharger actuator connector.
7. Remove the turbocharger wheel bearing oil inlet pipe.
8. Disconnect the turbocharger wheel bearing oil out hose.
9. Remove the turbocharger.

Install

1. Install the turbocharger to the exhaust manifold.
2. Install the turbocharger wheel bearing oil inlet pipe.
3. Connect the turbocharger wheel bearing oil out hose.

Tighten

Tighten the turbocharger tightening nuts to 34 N•m (25.1 lb-ft).

Tighten the turbocharger wheel bearing oil inlet pipe bolts to 23 N•m (17 lb-ft).