PCV Valve and Adapter Replace Opel Antara I

PCV Valve and Adapter Replace

Remove

1. Disconnect the negative battery cable.
2. Remove the beauty cover. Refer to Beauty Cover Replace .
3. Remove the charge air system hoses and ducts. Refer to Charging Air System Replace .

4. Disconnect the EGR solenoid connector and inlet/outlet vacuum hoses from EGR solenoid.
5. Disconnect the PCV hose from the turbocharger inlet elbow.
6. Remove the PCV valve bolts from PCV valve adapter.
7. Remove the PCV valve.

8. Remove the turbocharger heat shield.
9. Remove the PCV valve adapter with the adapter gasket.

Install

1. Install the PCV valve adapter with a new gasket.

Tighten

Tighten the PCV valve adapter bolts to 11 N•m (97.4 lb-in).

2. Install the PCV valve.

Tighten

Tighten the PCV valve bolts to 11 N•m (97.4 lb-in).