Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/Air Conditioning/Automatic Temperature Control Assembly Replace (Captiva)
Contents Wiring diagrams Section: Air Conditioning All sections

Automatic Temperature Control Assembly Replace (Captiva) Opel Antara I

Air Conditioning 2 illustrations ~111 words

Automatic Temperature Control Assembly Replace (Captiva)

Remove

  1. Disconnect the negative battery cable.
  2. Remove the audio trim panel. Refer to Audio Systems Replace (Captiva) .
  3. Remove the control assembly retaining screws.
  4. Pull out the unit to gain access to the rear.
  5. Disconnect the electrical connectors.
  6. Remove the air inlet tube.
  7. Remove the automatic temperature control assembly.

Install

  1. Connect the air inlet tube.
  2. Connect the electrical connectors.
  3. Position the automatic temperature control assembly and install the retaining screws.

Tighten

Tighten the control assembly retaining screws to 2.5 N•m (22 lb-in).

  1. Install the audio trim panel. Refer to Audio Systems Replace (Captiva) .
  2. Connect the negative battery cable.

More articles — Heating, Ventilation, Air Conditioning (HVAC)