Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/ABS/Rear Wheel Speed Sensor Replace
Contents Wiring diagrams Section: ABS All sections

Rear Wheel Speed Sensor Replace Opel Antara I

ABS 4 illustrations ~114 words



Rear Wheel Speed Sensor Replace

Remove

  1. Raise and support the vehicle.
  2. Remove the tyre and wheel assembly.
  3. Remove the brake rotor.
  4. Disconnect the wheel speed sensor electrical connector.
  1. Remove the wheel speed sensor bolt.
  2. Remove the wheel speed sensor through the brake backing plate.

Install

  1. Install the wheel speed sensor through the drum brake backing plate to the wheel bearing/hub assembly.
  2. Seat the wheel speed sensor harness grommet into the backing plate.
  3. Install the wheel speed sensor mounting bolt.

Tighten

Tighten the bolt to 8 N•m (71 lb-in).

  1. Connect the wheel speed sensor electrical connector.
  2. Install the brake rotor.
  3. Install the tyre and wheel assembly.
  4. Lower the vehicle.

More articles — Brakes