Home ReviewsRefund
Home/Opel/Antara/Opel Antara I (2007-2011)/Repair manual/ABS/Front Wheel Speed Sensor Replace
Contents Wiring diagrams Section: ABS All sections

Front Wheel Speed Sensor Replace Opel Antara I

ABS 4 illustrations ~101 words



Front Wheel Speed Sensor

Remove

  1. Raise and support the vehicle.
  2. Remove the tyre and wheel assembly.
  3. Remove the brake rotor. Refer to Rotor Replace .
  4. Disconnect the wheel speed sensor electrical connector.
  1. Remove the wheel speed sensor bolt.
  2. Remove the wheel speed sensor.

Install

  1. Install the wheel speed sensor to the wheel bearing/hub assembly.
  2. Install the wheel speed sensor mounting bolt.

Tighten

Tighten the bolt to 8 N•m (71 lb-in).

  1. Connect the wheel speed sensor electrical connector.
  2. Install the brake rotor. Refer to Rotor Replace .
  3. Install the tyre and wheel assembly.
  4. Lower the vehicle.

More articles — Brakes