Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Steering Wheel and Column/Turn Signal Multifunction Switch Replacement

Contents

Wiring diagrams Section: Steering Wheel and Column

All sections

Turn Signal Multifunction Switch Replacement Opel Agila B

Steering Wheel and Column ~165 words

Remove

1. Disconnect battery negative lead • Release nut
2. Remove lower trim panel (1) from instrument panel • Release 10x clip
3. Remove 2x canopy (2) from steering column • Remove 3x screw (3) • Release lower canopy from upper canopy – Release 7x clip

Note. Turn steering wheel to gain access to screws as required.

4. Remove multifunction switch (1) from steering column (2) • Disconnect harness connector (3) • Release clip

Install

5. Install new multifunction switch (1) to steering column (2) • Connect harness connector (3) • Secure clip

6. Install 2x canopy (2) to steering column • Secure lower canopy to upper canopy – Secure 7x clip • Install 3x screw (3)

Note. Turn steering wheel to gain access as required.

7. Install lower trim panel (1) to instrument panel • Secure 10x clip

8. Connect battery negative lead • Secure nut 11 Nm
9. Program all volatile memories – see operation “Program Volatile Memories”