Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Control and Fuel System - K12B/Air Cleaner Assembly Replacement
Contents Wiring diagrams Section: Engine Control and Fuel System - K12B All sections

Air Cleaner Assembly Replacement Opel Agila B

Engine Control and Fuel System - K12B ~356 words

Remove

  1. 1. Release engine harness from air cleaner housing (1) • Release clip
  2. 2. Release air cleaner housing with resonator from cylinder head cover and bracket • Remove 2x bolt (2)
  1. 3. Remove air cleaner element from air cleaner housing (3) • Release cover (1) from air cleaner housing – Release 2x clip (2), 2x locator
  2. 4. Remove air cleaner housing with resonator from cylinder head cover • Pull off to release 2x rubber locator
  1. 5. Disconnect hose (1) from cover (2) • Release clip (3)
  2. 6. Remove cover from engine • Release engine harness from cover – Release clip • Disconnect harness connector (4) from mass air flow (MAF) sensor and intake air temperature sensor assembly • Disconnect harness connector (5) from fuel tank evaporation solenoid valve (6) • Disconnect 2x hose (7) from fuel tank evaporation solenoid valve – Release 2x clip – Install 4x new blanking plug
  3. 7. Remove fuel tank evaporation solenoid valve from cover • Remove bolt
  4. 8. Remove MAF sensor and intake air temperature sensor from cover • Remove 2x screw

Install

  1. 9. Install MAF sensor and intake air temperature sensor assembly to new cover (2) • Install 2x screw
  2. 10. Install fuel tank evaporation solenoid valve (6) to cover • Install bolt
  3. 11. Install cover to engine • Connect 2x hose (7) to fuel tank evaporation solenoid valve – Remove 4x blanking plug – Secure 2x clip • Connect harness connector to MAF sensor and intake air temperature sensor assembly (4) • Connect harness connector (5) to fuel tank evaporation solenoid valve • Secure engine harness to cover – Secure clip
  4. 12. Connect hose (1) to cover • Secure clip (3)
  1. 13. Install air cleaner housing with resonator (3) to cylinder head cover • Push on to secure 2x rubber locator
  2. 14. Install air cleaner element to air cleaner housing • Secure cover (1) to air cleaner housing – Secure 2x locator, 2x clip (2)
  1. 15. Secure air cleaner housing with resonator (1) to cylinder head cover and bracket • Install 2x bolt (2)
  2. 16. Secure engine harness to air cleaner housing • Secure clip

More articles — Engine