Camshaft Position Sensor Replacement - Intake Opel Agila B

Remove

1. 1. Remove air cleaner assembly from vehicle – see operation “Air Cleaner Assembly Replacement”
2. 2. Disconnect harness connector from camshaft position sensor (1)
3. 3. Remove camshaft position sensor from cylinder head • Remove bolt (2)

Install

4. 4. Install new O ring (1) to new camshaft position sensor (2) • Apply suitable lubricant to O ring

5. 5. Install camshaft position sensor (1) to cylinder head • Install new bolt (2) 11 Nm
6. 6. Connect harness connector to camshaft position sensor

7. 7. Install air cleaner assembly to vehicle – see operation “Air Cleaner Assembly Replacement”