Specification
| Manufacturer name | Panasonic corporation |
|---|
| Audio Amplifier | 50 W x 4 ch |
| CD/DVD drive | Used disc | Ø 12 cm (4.7 in) |
| Playable disc | CD | CD-ROM (CD-DA) |
| CD-R (1) |
| CD-RW (1) |
| DVD | DVD-ROM |
| DVD-R (1) |
| DVD-RW (1) |
| Playable format | Music | MP3 |
| WMA |
| Image | DVD-VIDEO |
| VIDEO-CD |
| Text display function | ID3/WMA tag | Artist name |
| Album title |
| Song title |
| USB | High communication standard | USB1.1 |
| Playable format | Music | MP3 |
| WMA |
| Text display function | ID3/WMA tag | Artist name |
| Album title |
| Song title |
| IPod®Action (2) | IPod Classic® 1st generation |
| IPod Classic® 2nd generation |
| IPod nano® 3rd generation |
| IPod nano® 2nd generation |
| IPod nano® 1st generation |
| IPod® 5th generation |
| IPod touch® 1st generation |
| IPod touch® 2nd generation |
| IPhone 3rd generation |
| Flash memory | Total capacity | 2 GB |
| Camera controller | Guideline display function | Width/distance display |
| Predictive course lines display/non-display switch |
| Steering angle signal input method | CAN communication |
| Other functions | Speed sensitive volume function |
| Steering switch compliant |
| (1) If the reflectance of the surface of the media is low, the data may not be read. (2) It may not be used if it is not updated to the latest firmware or partial functions may not work if it is used. |
| (1) | If the reflectance of the surface of the media is low, the data may not be read. |
| (2) | It may not be used if it is not updated to the latest firmware or partial functions may not work if it is used. |
Scheme 279
Scheme 279: Front Display Unit
- The front display unit has an 7-inch QVGA liquid-crystal display.
- It receives the power (signal VCC and inverter VCC) from the AV control unit and operates.
- Composite image signals (DVD, USB memory-stored video data, auxiliary input, and camera) are input from AV control unit.
- RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing).
- Synchronizing signal (HP, VP) is output to AV control unit.
- This unit is connected to the AV control unit via serial communication. Images shown on the front display unit are controlled by the AV control unit.
| Manufacturer name | Panasonic corporation |
|---|
| Screen size | 7-inch QVGA [154.08 x 86.58 mm (6.1 x 3.4 in)] |
| Number of pixels | 480 x 234 pixels |
| Manufacturer name | Clarion Co., Ltd. |
|---|
| Screen size | 11-inch WVGA [243.6 mm x 137.52mm (9.6 in x 5.4 in)] |
| Number of pixels | 800 x 480 pixels |
| Manufacturer name | Panasonic corporation |
|---|
| Image pickup element | 1/4-inch interline CCD color |
| Effective number of pixels | Approx. 250, 000 pixels (510 x 492) |
| Minimum brightness | 2 lx |
| Angle of view | H: 137° V: 92° |
| Image | With mirror processing function |
Scheme 280
Scheme 280: Steering Angle Sensor
- Steering sensor is installed to the spiral cable.
- Steering angle sends the steering signal necessary for predictive course line of the rear view monitor function to the AV control unit via CAN communication.
Scheme 281
Scheme 281: RADIO ANTENNA
- AM/FM radio main antenna is located on the right rear side window glass and FM radio sub antenna on the left rear side window glass.
- The AM/FM radio main antenna path has an antenna amp. to obtain sufficient reception power.
| CAUTION | Affixing any mirror-type window films or metallic items (e.g. commercial antenna) on the rear side window glass causes a reduction in the radio receiver sensitivity. |
Scheme 282
Scheme 282: ANTENNA FEEDER LAYOUT
"tringle": Indicates that the part is connected at points with same symbol in actual vehicle.
Scheme 283
Scheme 283: Satellite Radio Tuner
- Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to the AV control unit.
- It is controlled with the AV control unit and serial communication (communication signal and request signal).
