ENTERING/EXITING SELF-DIAGNOSTICS
Note. DO NOT enter self-diagnostics unless engine is running.
- Start engine, then immediately press and hold OFF switch on A/C-heater control panel for at least 5 seconds. (Схема №1)
- Select self-diagnosis steps 1-5 by pressing temperature control switches. After selecting step 5, auxiliary mechanism test may be selected by pressing fan switch. Auxiliary mechanism tests temperature setting trimmer.
- To cancel self-diagnostics, press AUTO switch or turn ignition switch to OFF position.
TESTING
| WARNING | To avoid injury from accidental air bag deployment, read and follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section. |