Home/Nissan/Juke/Nissan Juke I (2010-2014)/Repair manual/Windows/Power Window Control System: Removal & Installation

Contents

Wiring diagrams Section: Windows

All sections

Power Window Control System: Removal & Installation Nissan Juke I

Windows 1 illustration

REMOVAL

Remove power window main switch finisher. Refer to " «REMOVAL AND INSTALLATION»(ref-516440-S22956212792012120600000) ".
Remove power window main switch (1) from power window main switch finisher (2) using flat-head screw driver (A).

Scheme 22

Scheme 22

Scheme 22

CAUTION

Do not fold the pawl of power window main switch finisher.

Note. The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION

Install in the reverse order of removal.

Note. If power window main switch is replaced or is removed, it is necessary to perform the initialization procedure. Refer to " WORK PROCEDURE ".