POWER WINDOW LOCK
The power window lock is designed to lock operation of all windows except for driver's window. When the lock switch is pressed to lock position, ground of the sub-switches in the power window main switch is disconnected. This prevents the power window motors from operating.
ANTI-PINCH DETECTION FUNCTION
Note. Depending on environment and driving conditions, if a similar impact or load is applied to power window, it may lower.
During raising operation of driver or passenger power window (if equipped), if door control module detects that foreign object is pinched, power window lowers approximately 5.91 in. (150 mm).
"Retained Pwr"
- Turn ignition switch "ON".
- Connect "CONSULT-II" to the data link connector.
- Turn ignition switch "ON".
- Touch "START".
- Touch "BCM".
- Touch "RETAINED PWR".
- Select diagnosis mode. "ACTIVE TEST" is available for the power window. See «ACTIVE TEST»(ref-152824-S12023324852003022700000) .
Scheme 15
ENCODER & LIMIT SWITCH CHECK (DRIVER SIDE)
Note. For connector symbol explanation, see HOW TO READ CONNECTOR SYMBOLS .
- For step 1 (Scheme 16)
- For step 2 (Scheme 17)
- For step 3 (Scheme 18)
Scheme 16
Scheme 17
Scheme 18
ENCODER & LIMIT SWITCH CHECK (PASSENGER SIDE)
Note. For connector symbol explanation, see HOW TO READ CONNECTOR SYMBOLS .
- For step 1 (Scheme 19)
- For step 2 (Scheme 20)
- For step 3 (Scheme 21)
