ADHESIVES
| Item | Specified adhesive |
|---|---|
| Windshield | 3M™ AAD part No. 8609 super fast urethane and 3M™ AAD part No. 8608 super fast urethane primer or equivalent |
| Rear window glass |
ADHESIVES SPECIFICATION
| Item | Specified adhesive |
|---|---|
| Windshield | Adhesive tape: Double-sided tape [6.5 mm (0.25 in) width, 100 mm (3.93 in) length and 0.4 mm (0.015 in) thickness] |
ADHESIVES SPECIFICATION
LUBRICANT
| Item | Specified lubricant | Quantity | |
|---|---|---|---|
| Degreaser agent | Grease and dirt removal from parts surface | 3M™ ADD Part No. 8906 or equivalent | As required |
LUBRICATION SPECIFICATION
GENERAL
The windshield, rear window glass are attached by an urethane-base adhesive to the window frame. This adhesive provides improved glass holding and sealing, and also gives body openings a greater structural strength.
ITEMS
| Item | Application | Quantity |
|---|---|---|
| Wire (diameter x length) | For cutting adhesive | Five pieces of wire 0.6 mm x 1 m (0.02 in x 3.3 ft) |
| Glass adhesive knife | For cutting adhesive | One |
| Sealant gun | For adhesive application | One |
| Wiping shop towels | As required | |
| Sealer | For prevention of water and wind leaks after adhesive application | As required |
| 3M™ AAD Part No. 8906 or equivalent | For cleaning or degreasing body parts and glasses | As required |
| Glass holder MB990480 | For securing of window glass | Two |
WIRE DIAMETER SPECIFICATION