REMOVAL AND INSTALLATION
| CAUTION | Before removing the steering wheel and driver's air bag module assembly, refer to SERVICE PRECAUTIONS and DRIVER'S AIR BAG MODULE AND CLOCK SPRING < Except RALLIART > or DRIVER'S AIR BAG MODULE AND CLOCK SPRING < RALLIART > < RALLIART > < Vehicles with WCM >. After the installation, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point (Refer to STEERING WHEEL SENSOR CALIBRATION ). < Vehicles with WCM and ASC > |
Scheme 7
Scheme 8
- Insert the key into the steering lock cylinder, and turn the ignition key to the ACC position.
- With using a cross-headed screw driver (small) or similar items to press in the lock pin, remove the ignition key, and then remove the steering lock cylinder.
>> A << WIRELESS CONTROL MODULE < VEHICLES WITH WCM >/RECEIVER ANTENNA MODULE < VEHICLES WITH KOS > INSTALLATION
Check that the top claw of receiver antenna module is fixed securely to the boss of steering lock and the antenna is not floated on the key cylinder.