Wiper/washer Systems - Except Evolution: Diagnosis Mitsubishi Lancer IX

DIAGNOSIS

Note. Even when the ETACS-ECU has failed, the windshield wiper can work at low speed as fail-safe mode. (Normally, the windshield wiper operates when the ignition switch is at the "ACC" position. But, if it enters the fail-safe mode, the wiper can operate only when the ignition switch is at the "ON" position.)

For diagnostic procedures, see MULTIPLEX CONTROL SYSTEMS article.

WINDSHIELD INTERMITTENT WIPER INSPECTION

1. If the windshield intermittent wiper interval adjusting knob is operated, the wiper interval should change.
2. Holding the windshield intermittent wiper interval adjusting knob, input the simulated vehicle speed with scan tool MB991502 and check that the wiper interval changes as the vehicle speed changes.
3. If not, see «MULTIPLEX CONTROL SYSTEMS»(ref-169966) article.