FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Bearing retainer bolt | 3.7 ± 0.7 N.m (33 ± 6 in-lb) |
| Engine mount bracket to engine nut | 67 ± 7 N.m (50 ± 5 ft-lb) |
| Engine mount insulator to frame bolt | 44 ± 10 N.m (33 ± 7 ft-lb) |
| Front bracket assembly bolt | 4.4 ± 1.0 N.m (39 ± 9 in-lb) |
| Generator bolt | 23 ± 2 N.m (17 ± 1 ft-lb) |
| Generator brace bolt | 23 ± 2 N.m (17 ± 1 ft-lb) |
| Generator nut | 44 ± 10 N.m (33 ± 7 ft-lb) |
| Generator pulley nut | 118 ± 19 N.m (87 ± 14 ft-lb) |
| Power steering hose clamp bolt | 12 ± 2 N.m (102 ± 22 in-lb) |
| Regulator assembly bolt | 3.7 ± 0.7 N.m (33 ± 6 in-lb) |
| Starting system | |
| Magnetic switch screw | 5.8 ± 1.6 N.m (52 ± 14 in-lb) |
| Rear bracket screw | 3.4 ± 1.0 N.m (30 ± 9 in-lb) |
| Stator bolt | 48 ± 5 N.m (36 ± 4 ft-lb) |
| Stator screw | 5.8 ± 1.6 N.m (52 ± 14 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 8.8 ± 1.0 N.m (78 ± 9 in-lb) |
| Crankshaft position sensor bolt | 9.8 ± 2.0 N.m (87 ± 17 in-lb) |
| Ignition coil bolt | 10 ± 2 N.m (89 ± 17 in-lb) |
| Knock sensor | 23 ± 2 N.m (17 ± 1 ft-lb) |
| Knock sensor clamp bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Spark plug | 25 ± 5 N.m (19 ± 3 ft-lb) |
Fastener Tightening Specifications
GENERAL SPECIFICATIONS
| ITEMS | SPECIFICATIONS |
|---|---|
| Generator | |
| Type | Positive battery positive voltage sensing |
| Identification number | A2TB0892 |
| Part No. | MD343562 |
| Rated output V/A | 12/85 |
| Voltage regulator | Electronic built-in type |
| Starter motor | |
| Type | Reduction drive with planetary gear |
| Identification number | M0T87581 |
| Part No. | MD377649 |
| Rated output kW/V | 1.3/12 |
| Voltage regulator | 8 |
General Specifications Chart (1 Of 2)
| ITEMS | SPECIFICATIONS |
|---|---|
| Ignition coil | |
| Type | Molded 2-coil |
| Spark plugs | |
| NGK | BKR5E-11 |
| DENSO | K16PR-U11 |
| CHAMPION | RC10YC4 |
General Specifications Chart (2 Of 2)
