REMOVAL AND INSTALLATION
| CAUTION | If the vehicle is equipped with the Brembo disc brake, during maintenance, take care not to contact the parts or tools to the caliper because the paint of caliper will be scratched. |
Scheme 5
<< A >> POWER STEERING OIL PUMP, BRACKET AND OIL RESERVOIR ASSEMBLY REMOVAL
Note. Tie the removed power steering oil pump, bracket and oil reservoir assembly with a rope and set aside where they cannot hinder the removal of the power steering oil pump bracket.
Remove the power steering oil pump, bracket and oil reservoir assembly with the hoses attached from the power steering oil pump bracket.
Scheme 6
Required Special Tool
- MD998773: Knock sensor wrench
<< A >> KNOCK SENSOR REMOVAL
Use special tool MD998773 to remove the knock sensor.
Scheme 7
>>A<< KNOCK SENSOR INSTALLATION
Use special tool MD998773 to install the knock sensor.
