| Item | Standard value |
|---|---|
| Set position of windshield wiper arm/blade assembly mm (in) | Ceramic end line ± 5.0(0.20) |
| Heated door mirror resistance value ohm | 8.4 ± 1.2 at 25°C (77°F) |
SERVICE SPECIFICATIONS
< LANCER SPORTBACK >
| Item | Standard value |
|---|---|
| Stop position of the windshield wiper arm/blade assembly mm (in) | A (Passenger's side): Ceramic end line ± 5 (0.20) |
| B (Driver's side): Front deck garnish end 45 ± 5 (1.77 ± 0.20) | |
| Stop position of rear wiper arm and blade assembly (Distance from the wiper blade to the ceramic line on the liftgate glass) mm (in) | 5 to 25(0.2 to 1.0) from the ceramic line |
| Heated door mirror resistance value ohm | 8.4 ± 1.2 at 25°C (77°F) |
SERVICE SPECIFICATIONS
LUBRICANT
| Item | Specified lubricant | Quantity | |
|---|---|---|---|
| Wiper motor link rod | Contact joint between link rod and wiper motor link plate | Multipurpose grease SAE J310, NLGI No. 2 or equivalent | As required |
LUBRICANT SPECIFICATIONS
ADHESIVE
| ITEM | SPECIFICATION |
|---|---|
| Front three-diamond mark | Adhesive tape: Double-sided tape 0.8 mm (0.03 inch) thickness Adhesive tape remover: 3M™ AAD Part number 8906 or equivalent |
| Side air dam | Adhesive tape: Double-sided tape 4 mm (0.16 in) width and 1.2 mm (0.05 in) thickness 8 mm (0.32 in) width and 1.2 mm (0.05 in) thickness Adhesive tape remover: 3M™ AAD Part number 8906 or equivalent |
ADHESIVE SPECIFICATIONS