Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution X (2007-2016)/Repair manual/Heating, Air Conditioning and Ventilation (Except Lancer Evolution)/<< A >> HOSE/PIPE DISCONNECTION
Contents Section: Heating, Air Conditioning and Ventilation (Except Lancer Evolution) All sections

<< A >> HOSE/PIPE DISCONNECTION Mitsubishi Lancer Evolution X

Heating, Air Conditioning and Ventilation (Except Lancer Evolution) 3 illustrations ~177 words

<< A >> HOSE/PIPE DISCONNECTION

CAUTIONAs the compressor oil and receiver are highly moisture absorbent, use a non-porous material to plug the hose and nipples.

To prevent the entry of other foreign bodies, plug the condenser, compressor, and expansion valve nipples.

WARNINGWhen removing and installing the front passenger seat, be sure to carry out accuracy check occupant classification sensor after the seat has been installed in the vehicle. (Refer to ON-VEHICLE SERVICE ).

Scheme 89

Scheme 89
Scheme 89

Scheme 90

Scheme 90: LANCER
Scheme 90: LANCER

Scheme 91

Scheme 91: LANCER SPORTBACK
Scheme 91: LANCER SPORTBACK

See also:
• HOW TO COPE WITH INTERMITTENT MALFUNCTION
• DIAGNOSIS
• HARNESS CONNECTOR INSPECTION
• DIAGNOSTIC TROUBLE CODE CHART
• CAN BUS DIAGNOSTICS TABLE
• DIAGNOSTIC TROUBLE CODE CHART < SRS-ECU >
• EXPLANATION ABOUT THE SCAN TOOL (M.U.T.-III) CAN BUS DIAGNOSTICS
• DIAGNOSTIC TROUBLE CODE CHART
• DIAGNOSTIC TROUBLE CODE CHART
• DIAGNOSTIC TROUBLE CODE CHART
• DATA LIST REFERENCE TABLE
• ACTUATOR TEST
• DRIVE BELT TENSION CHECK
• DRIVE BELT TENSION CHECK
• DRIVE BELT TENSION CHECK
• CURB IDLE SPEED CHECK
• CURB IDLE SPEED CHECK
• CURB IDLE SPEED CHECK
• GLOVE BOX
• A/C COMPRESSOR CLUTCH RELAY ON CONDITIONS CHART
• U1415
• U0019
• U0141
• U0151
• U0154
• U0155
• U0168
• U0184
• U0195
• HOW TO CONNECT THE SCAN TOOL (M.U.T.-III)
• DIAGNOSTIC TROUBLE CODE CHART
• A/C COMPRESSOR CLUTCH TEST
• CHARGING