Manual sections
Repair manual

Controller Area Network (CAN) - Lancer Evolution Mitsubishi Lancer Evolution X

Step-by-step instructions on "Controller Area Network (CAN) - Lancer Evolution" for Mitsubishi Lancer Evolution X (2007–2016). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

40subsections
40articles
222illustrations

GENERAL INFORMATION

1 article

SPECIAL TOOLS

1 article

TEST EQUIPMENT

1 article

SERVICE PRECAUTIONS

1 article

PRECAUTIONS ON HOW TO REPAIR THE TERMINATOR RESISTOR

1 article

CAN BUS LINE REPAIR HARNESS (PART NAME AND NUMBER)

1 article

EXPLANATION ABOUT THE SCAN TOOL (M.U.T.-III) CAN BUS DIAGNOSTICS

1 article

CAN BUS DIAGNOSTICS TABLE

1 article

DIAGNOSTIC ITEM 1: Diagnose when the scan tool cannot receive the data sent by ETACS-ECU

1 article

FUNCTION

1 article

TROUBLE JUDGMENT CONDITIONS

1 article

TROUBLESHOOTING HINTS

1 article

DIAGNOSIS

1 article

DIAGNOSTIC ITEM 2: Malfunction of the ETACS-ECU

1 article

TROUBLE JUDGEMENT CONDITIONS

1 article

TROUBLESHOOTING HINT

1 article

DIAGNOSTIC ITEM 3: Abnormal short between the CAN-C bus lines

1 article

DIAGNOSTIC ITEM 6: Diagnose when the scan tool cannot receive the data sent by AWC-ECU

1 article

DIAGNOSTIC ITEM 7: Diagnose when the scan tool cannot receive the data sent by steering wheel sensor

1 article

DIAGNOSTIC ITEM 8: Diagnose when the scan tool cannot receive the data sent by shift lever.

1 article

DIAGNOSTIC ITEM 9: Diagnose when the scan tool cannot receive the data sent by ASC-ECU

1 article

DIAGNOSTIC ITEM 10: Diagnose when the scan tool cannot receive the data sent by ECM

1 article

DIAGNOSTIC ITEM 11: Diagnose when the scan tool cannot receive the data sent by TC-SST-ECU.

1 article

DIAGNOSTIC ITEM 12: Diagnose the lines between the ETACS-ECU and joint connector (CAN2)

1 article

DIAGNOSTIC ITEM 13: Diagnose the lines between joint connector (CAN2) and joint connector (CAN3)

1 article

DIAGNOSTIC ITEM 14: Diagnose the lines between joint connector (CAN3) and joint connector (CAN4).

1 article

DIAGNOSTIC ITEM 15: Diagnose when the scan tool cannot receive the data sent by KOS-ECU

1 article

DIAGNOSTIC ITEM 16: Diagnose when the scan tool cannot receive the data sent by WCM

1 article

DIAGNOSTIC ITEM 17: Diagnose when the scan tool cannot receive the data sent by SRS-ECU

1 article

DIAGNOSTIC ITEM 18: Diagnose when the scan tool cannot receive the data sent by occupant classification-ECU

1 article

DIAGNOSTIC ITEM 19: Diagnose when the scan tool cannot receive the data sent by A/C-ECU or heater control unit

1 article

DIAGNOSTIC ITEM 20: Diagnose when the scan tool cannot receive the data sent by radio and CD player or CD changer

1 article

DIAGNOSTIC ITEM 21: Diagnose when the scan tool cannot receive the data sent by CAN box unit

1 article

DIAGNOSTIC ITEM 22: Diagnose when the scan tool cannot receive the data sent by satellite radio tuner

1 article

DIAGNOSTIC ITEM 23: Diagnose when the scan tool cannot receive the data sent by hands free module

1 article

DIAGNOSTIC ITEM 24: Diagnose when the scan tool cannot receive the data sent by combination meter.

1 article

DIAGNOSTIC ITEM 25: Short to power supply or ground in both CAN_H and CAN_L lines of the CAN-B bus lines.

1 article

DIAGNOSTIC ITEM 26: Diagnose the ETACS-ECU, joint connector (CAN1) or lines between ETACS-ECU and joint connector (CAN1)

1 article

DIAGNOSTIC ITEM 27: Short to power supply or ground, open circuit or line-to-line short in the CAN-B bus lines

1 article