Home ReviewsRefund
Home/Mitsubishi/Lancer Evolution/Mitsubishi Lancer Evolution VIII (2003-2005)/Repair manual/Exterior Lights/High Mounted Stop Light - Except Evolution & Sportback
Contents Section: Exterior Lights All sections

High Mounted Stop Light - Except Evolution & Sportback Mitsubishi Lancer Evolution VIII

Exterior Lights 4 illustrations

HIGH-MOUNTED STOP LIGHT BULB REPLACEMENT

CAUTIONDo not touch bulb surface bare-handed or with dirty gloves. If dirt is attached on glass surface of the bulb, immediately use alcohol or thinner to remove dirt, and install the bulb after well dried.

Remove socket from trunk compartment, and replace bulb.

Scheme 49

Scheme 49
Scheme 49

Scheme 50

Scheme 50: REMOVAL AND INSTALLATION
Scheme 50: REMOVAL AND INSTALLATION

Scheme 51

Scheme 51
Scheme 51

<< A >> HIGH-MOUNTED STOP LIGHT REMOVAL < WITH REAR SPOILER >

Use the following steps to easily route high-mounted stop light harness in the event of installation

Scheme 52

Scheme 52: << A >> HIGH-MOUNTED STOP LIGHT REMOVAL < WITH REAR SPOILER >
Scheme 52: << A >> HIGH-MOUNTED STOP LIGHT REMOVAL < WITH REAR SPOILER >
  1. Tie a string on the high-mounted stop light harness (at the connector side). CAUTION: Ensure that the string is tightly tied.
  2. Carefully pull out the high-mounted stop light.

More articles — Lighting