SYSTEM TESTS
| CAUTION | To avoid damaging control modules all electrical testing should be done with a DVOM. DO NOT use an analog meter or test light to check control module circuits. |
After verifying problem using DIAGNOSTIC TROUBLE CODE MEMORY (SECTION 11) under SELF-DIAGNOSTIC SYSTEM, perform appropriate test step(s). For aid in using diagnostic charts, see USING DIAGNOSTIC CHARTS .
PREPARATION FOR TESTS (SECTION 22)
- Turn ignition OFF.
- Disconnect socket box with contact module 1 and contact box.
Scheme 143
Scheme 144
Scheme 145
ELECTRICAL SYSTEM TESTS (SECTION 23)
Note. For aid in using diagnostic charts, see USING DIAGNOSTIC CHARTS .
