On-Board Diagnostic (HVAC): Other Mazda MX-5 NC рестайлинг

Malfunction detection function

1. Expose the solar radiation sensor to natural sunlight. NOTE: If incandescent light is not shone on the solar radiation sensor, the climate control unit determines that there is a malfunction.
2. Switch the ignition to ON, then press and hold the A/C switch for 5 s or more within 10 s.
3. Turn the fan switch to the AUTO position.
4. Turn and adjust the mode dial to the inspection item. If the system is normal, the A/C switch indicator light illuminates. INSPECTION CHART INSPECTION ITEM MODE DIAL POSITION A/C SWITCH INDICATOR OK NG ALL SENSOR AUTO ON OFF AMBIENT TEMPERATURE SENSOR OPEN/VENT ON OFF PASSENGER COMPARTMENT TEMPERATURE SENSOR BI-LEVEL ON OFF SOLAR RADIATION SENSOR OPEN/HEAT ON OFF EVAPORATOR TEMPERATURE SENSOR VENT ON OFF AIR MIX ACTUATOR HEAT ON OFF
5. Press the recirculate switch or switch the ignition to off to finish.

Door position check function

1. Switch the ignition to ON, then press and hold the A/C switch for 5 s or more within 10 s.
2. Turn the fan switch to the LO position.
3. Verify that the indicator light of the climate control unit illuminates. MALFUNCTION CHART MALFUNCTION INDICATOR PARTS ALL OK A/C SWITCH AIRFLOW MODE ACTUATOR REC SWITCH AIR INTAKE ACTUATOR REAR WINDOW DEFROSTER SWITCH
4. Press the recirculate switch or switch the ignition to off to finish.

NO. 1 AMBIENT TEMPERATURE SENSOR MALFUNCTION

POSSIBLE CAUSE REFERENCE

NO. 2 PASSENGER COMPARTMENT TEMPERATURE SENSOR MALFUNCTION

POSSIBLE CAUSE REFERENCE

NO. 3 SOLAR RADIATION SENSOR MALFUNCTION

POSSIBLE CAUSE REFERENCE

NO. 4 EVAPORATOR TEMPERATURE RADIATION SENSOR MALFUNCTION

POSSIBLE CAUSE REFERENCE