Note. The initialization value of the steering angle sensor is stored using the battery power supply. Therefore, the battery power supply of the steering angle sensor is cut and the stored initialization value is cleared when any of the following items are performed. DTC C1306 is stored in the memory. Negative battery cable disconnection Steering angle sensor connector disconnection Fuse (ROOM 15A) removal Wiring harness disconnection between battery and steering angle sensor connector
| DTC | C1306 | Steering angle sensor (abnormal initialization) system |
|---|---|---|
| DETECTION CONDITION | Signal which indicates that the initialization has not been performed is continuously received from the steering angle sensor for 100 ms. | |
| POSSIBLE CAUSE | The initialization procedure for the steering angle sensor has not been performed. The negative battery cable connector was disconnected previously. The steering angle sensor connector was disconnected previously. The fuse (ROOM 15A) was removed previously. The wiring harness between battery-steering angle sensor connector is disconnected. Steering angle sensor malfunction | |
DTC C1306 DETECTION CONDITION AND POSSIBLE CAUSE