Home ReviewsRefund
Home/Mazda/MX-5/Mazda MX-5 NC (2005-2008)/Repair manual/Automatic Trans/Automatic Transmission Shift Mechanism: Removal & Installat…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Shift Mechanism: Removal & Installation Mazda MX-5 NC

Automatic Trans

Manual Shaft Lever Component Installation Note

  1. Align the mark of the manual shaft lever component (Схема №30)
  2. Install the manual shaft lever component installation nut. Tightening torque 10.8-14.7 N.m {111-149 kgf.cm, 96.4-129.3 in.lbf}

STEERING SHIFT SWITCH REMOVAL/INSTALLATION

Note. The down switch is built into the audio control switch.

  1. Remove the steering shift switch. (See «AUDIO CONTROL SWITCH REMOVAL/INSTALLATION»(ref-244490-S26606319412006092400000) .)
  2. Install in the reverse order of removal.

More articles — Automatic Transmission Shift Mechanism