COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
| CAUTION | If the disc on the combination switch is deformed or has foreign material adhering to it, performance of the steering angle sensor may be reduced, causing abnormal operation. When handling the combination switch, be careful not to deform the disc and make sure there is no foreign material on it. |
Scheme 53
- Disassemble in the order indicated in the illustration below.
- Assemble in the reverse order of disassembly.
Scheme 54
Scheme 54: LIGHT SWITCH REMOVAL/INSTALLATION
- Disconnect the negative battery cable.
- Remove the lower column cover. (See «COLUMN COVER REMOVAL/INSTALLATION»(ref-663022-S36532790502014101600000) article.)
- Put aside the upper column cover.
- Remove in the order indicated in the illustration below.
- Install in the reverse order of removal.
