Contents Wiring diagrams Section: Entertainment Systems All sections

Entertainment System: Overview Mazda CX-9 I

Entertainment Systems 6 illustrations ~139 words

Scheme 5

Scheme 5: Audio System

Scheme 6

Scheme 6: Car-navigation System, Rear Entertainment System

Scheme 7

Scheme 7: Rear View Monitor

Scheme 8

Scheme 8: Antenna Feeder

Scheme 9

Scheme 9: AUDIO UNIT REMOVAL/INSTALLATION
  1. Disconnect the negative battery cable.
  2. Remove the following parts: Front console box mat. See «FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION»(ref-345331-S10485313842009102000000) . Indicator panel. See «INDICATOR PANEL REMOVAL/INSTALLATION»(ref-345331-S24413902932009102000000) . Decoration panel. See «DECORATION PANEL REMOVAL/INSTALLATION»(ref-345331-S31374414672009102000000) . Front console box. See «FRONT CONSOLE BOX REMOVAL/INSTALLATION»(ref-345331-S18733072432009102000000) . Center panel. See «CENTER PANEL REMOVAL/INSTALLATION»(ref-345331-S22152336712009102000000) .
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal. CAUTION: When installing the Audio unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.

Scheme 10

Scheme 10: Audio Unit Removal Note
  1. Pull the audio unit outward, detach clip A from the dashboard, and then remove the audio unit.