Home ReviewsRefund Car not listed?
Home/Mazda/3/Mazda 3 BM (2013-2016)/Repair manual/Entertainment Systems/Entertainment System: Overview
Contents Wiring diagrams Section: Entertainment Systems All sections

Entertainment System: Overview Mazda 3 BM

Entertainment Systems 8 illustrations ~200 words
Fig. 1: Locating Entertainment System Components (1 Of 3)
Scheme 1: Locating Entertainment System Components (1 Of 3)
Fig. 2: Locating Entertainment System Components (2 Of 3)
Scheme 2: Locating Entertainment System Components (2 Of 3)
Fig. 3: Locating Entertainment System Components (3 Of 3)
Scheme 3: Locating Entertainment System Components (3 Of 3)

Switch Area Of Audio Unit. Scheme 1

Scheme 1: Switch Area Of Audio Unit
Scheme 1: Switch Area Of Audio Unit

Scheme 2

Scheme 2
Scheme 2
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
  2. Remove the center panel. (See CENTER PANEL REMOVAL/INSTALLATION.)
  3. Remove in the order indicated in the table. (Scheme 2): Audio Unit, Connector, Clip And Screws
  4. Install in the reverse order of removal.

Scheme 3

Scheme 3
Scheme 3

Scheme 4

Scheme 4
Scheme 4

Scheme 5

Scheme 5
Scheme 5
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
  2. Remove the following parts: Center panel (See CENTER PANEL REMOVAL/INSTALLATION.) Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.) Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.) Passenger-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
  3. Remove the screws.
  4. Remove in the order indicated in the table.
  5. Remove the bolt.
  6. Remove the bracket.
  7. Install in the reverse order of removal.

More articles — Entertainment System